Stauer Enduro Instruction Manual

QuadFold_EnduroHybrid_Layout 1 8/15/13 9:54 AM Page 1
WATCH DISPLAY
E.
D.
A - START/STOP BUTTON
B - CROWN
C - RESET BUTTON
D - REAL-TIME/MODE BUTTON
E - BACKLIGHT BUTTON
DUAL TIME SETTING
2. Press the Reset Button (part C) again to
finish setting.
3. Press the Start/Stop Button (part A) to
start and stop counting, and press the
Reset Button (part C) to stop.
4. Timer alarm sounds for 10 seconds
when counting down to 0:00:00. The
timer is automatically reset to its start-
ing value after the alarm stops.
TO SET THE DAILY ALARM/CHIME
1. Press the Start/Stop Button (part A)
to turn the alarm and the chime on/off.
2. Press and hold the Reset Button (part
C) for two seconds to select the hour set-
ting. Press the Real-Time/Mode Button
(part D) to select the minute setting.
Press the Start/Stop button (part A) to
adjust the flashing item.
TIMESETTING
This watch features hour, minute,
second, month, date, and day of
A.
the week displays.
TO SET THE TIME – HOUR,
B.
MINUTE AND SECOND HANDS
1. Pull the crown (part B) out to
position "1" and rotate it to the
desired time.
2. Once the correct time is set, push
the crown back into original "0"
(zero) position.
TO SET THE TIME –
C.
DIGITAL DISPLAY
1. Press the Reset Button (part C)
for two seconds and then press
the Start/Stop Button (part A) to
zero.
2. Press the Real-Time/Mode Button
(part D) three times. The seconds
display will blink. Select an item in
DUAL TIME SETTING
3. The alarm will sound for 20 seconds
when set time is reached.
DUAL TIME SETTING
1. In the Dual Time mode, press and
hold the Reset Button (part C) for two
seconds to select the minute setting.
Press the Real-Time/Mode Button (part
D) to select hour setting. Press the
Start/Stop Button (part A) to adjust the
flashing item.
2. Press the Reset Button (part C) again to
finish setting and to return to Dual Time
display mode.
CHRONOGRAPH SETTINGS STOPWATCH SETTING
the following sequence by pressing the 3. To record split times, press the Reset
Start/Stop Button (part A):
– Second
4. To stop coutning, press the Start/Stop
– Minute
– Hour
– 12/24 hour format 5. To reset (set to zero) the split time display
– Month
– Day
6. To exit the Chronograph mode press
– Week
3. Press the Reset Button (part C) to
return to Real Time mode.
TO USE THE STOPWATCH
TO SET THE CHRONOGRAPH The display range of the timer is 23
hours, 59 minutes and 59 seconds.
The display range of the chronograph is
23 hours, 59 minutes and 59.99 seconds. 1. Press and hold the Reset Button (part
C) for two seconds to select the hour
1. To start the Chronograph feature, press
setting. Press the Real-Time/Mode
the Start/Stop Button (part A).
Button (part D) to select the minute set-
2. Once stopped, press the Reset Button
ting. Press the Start/Stop Button (part A)
(part C) to reset to zero.
to adjust the flashing item.
FEATURES
- Digital chronograph and analog functions
- Stainless steel back
- Luminescent hands
- Electroluminescence backlight
(EL Backlight)
- Daily alarm function
- Black silicone strap
- Water resistant to 3 ATM
Visit us at www.stauer.com
to learn more about the fantastic
benefits of owning a Stauer Watch!
www.stauer.com
Button (part C) while the Chrono is
running to turn the split timer on/off.
Button (part A).
press the Reset Button (part C).
the Real-Time/Mode Button (part D) –
watch will return to the real-time mode.
®
Stauer Enduro Hybrid Watch
INSTRUCTION MANUAL