Subscribe to Our Youtube Channel
Related Manuals for Bake Max BMVC001
Summary of Contents for Bake Max BMVC001
- Page 1 VEGETABLE CUTTER BMVC001 USER MANUAL Questions? Contact Us: Toll Free: 1-800-565-2253 Email: Info@BakeMax.com www.BakeMax.com Warranty Registration www.BakeMax.com/Warranty-Registration...
- Page 3 1. INFORMATION ON SAFETIES 1.1. GENERAL PRECAUTIONS • THE BMBVC001 VEGETABLE CUTTING MACHINE MUST BE MANAGED BY SKILLED PERSONNEL WHO ARE FAMILlAR WITH THE INSTRUCTIONS FOR USE AND SAFETY CONTAINED IN THIS MANUAL. • IN THE CASE OF ROTATION OF PERSONNEL, VOCATIONAL TRAINING IS NECESSARY. •...
-
Page 4: Technical Features
TECHNICAL FEATURES TECHNICAL FEATURES OF VEGETABLE CUTTING MACHINE FOR MODEL BMVC001. • THEIR USE, CLEANING AND MAINTENANCE IS QUITE SAFE. THANKS TO THE DESIGN AND TO THE FABRICATION OF ALL PARTS IN ALUMINIUM AND MAGNESIUM ALLOY WITHOUT SHARP EDGES FOR EASY CLEANING OPERATIONS. -
Page 5: Use Of The Equipment
WARNING OPEN THE COVER, ROTATE THE SIDE HANDLE AND REMOVE THE CUTTING DISC (IF ANY) WITH IDLE MACHINE, (OR WITH THE WHITE PLASTIC EJECTOR), THROUGH THE UPPER (ROUND) OPENING. PRES THE START GREEN BUTTON ONCE FOLLOWED BY THE STOP RED BUTTON, CHECK TO MAKE SURE THE CENTRAL PIN DIRECTION IS ROTATING COUNTER CLOCKWISE. - Page 6 4.2. SETTING THE DISCS ON THE MACHINE ROTATE THE KNOB AS SHOWN IN FIGURE (1) AND OPEN THE COVER. SET THE FIRST PLASTIC EJECTING DISC IN FIGURE (2), THEN THE DISC SELECTED FOR THE CUTTING. CLOSE THE COVER AND REVERSE THE ROTATION OF THE HANDLE. WORK ON THE START BUTTON TO AUTOMATICALLY HOOK THE DISCS IN THE CORRECT POSITION.
-
Page 7: Cleaning And Maintenance Operations
WARNING: NEVER USE YOUR HAND TO PRESS FOOD THROUGH THE MACHINE, BUT PRESS THE VEGETABLE WITH THE PESTLE SUPPLIED. 4.4. RELEASE AND REPLACEMENT OF THE DISCS • TURN THE KNURLED HANDLE AND LIFT THE COVER. FIGURE (1) • TURN THE DISC COUNTER CLOCKWISE AND COVER THE CUTTING EDGE WITH APPROPRIATE MATERIAL (RUBBER, FABRIC, ETC), THEN LIFT IT BY SETTING YOUR HAND UNDER THE DISC. - Page 8 5.2. OPERATIONS IN THE CASE OF FAILURES • WHEN THE WHITE PILOT LIGHT ON THE PANEL IS ON, BUT THE MACHINE DOES NOT START, CHECK TO MAKE SURE THAT THE HANDLE AND THE COVER ARE BOTH CLOSED. BOTH SAFETY MICROSWITCHES WILL PREVENT THE MACHINE FROM STARTING WHENEVER ALL SECURITIES ARE NOT ACTIVATED.
Need help?
Do you have a question about the BMVC001 and is the answer not in the manual?
Questions and answers