T+M Time TT100 Instruction Manual

Digital Ultrasonic Thickness Testers

Specifications

Material :
Range (probe dependant) : 1.0 to 225.0 mm
Accuracy :
Resolution :
Sound velocity range :
Probe Tip diameter :
Pipe Diameter Limits :
Working Temp. :
Relative Humidity :
Surface Temperature :
Non-linear Automatic Compensation
Indication of Coupling Status and low Voltage

Optional probes

Type of Probe Working
Frequency
5PØ10 5MHz
5PØ10/90˚ 5MHz
7PØ6 7MHz
SZ2.5P 2.5MHz
ZW5P 5MHz

Standard Package

x
Plastic case – foam lined with Combination Lock
x
2 Probes – Straight & Right angle – both 5 MHz
x
Coupling Agent – (Vaseline or Grease Hand Cleaner will also give accurate readings)
x
Instruction Manual
Time TT100
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
Metallic & Non-Metallic
+/-1% of Material Thickness + 0.1 mm
0.1 up to 99.9 mm
1000 to 9999 m/sec
12 mm
20 mm x 3 mm
-5 to 40 deg C
< 90%
< 60 deg C
Measuring Minimum
Thickness Size of
Range Measuring Pipe
1.2 - 225 Ø20 x 3
1.2 - 225 Ø20 x 3
0.75 - 60 Ø15 x 2
3 - 300
4 - 80
:
Supplied by
TT100 is a hand held microprocessor controlled thickness gauge
specifically designed for measuring the thickness of metallic and
non-metallic materials e.g. aluminium, titanium, plastics, ceramics,
glass and other good ultrasonic wave-conducting as long as the
material has parallel
With uses in many areas of industry TT100 can perform precise
measurements on various types of raw materials, components
parts, and assembled machinery. It can also be used to monitor
all types of pipes and pressure vessels for loss of thickness due
to corrosion.
TT100 is very easy to use, after a simple calibration to a known
thickness or sound velocity, the gauge will give fast and accurate
readings in millimetres. Sound velocities for 5 different materials
can be pre-set and 10 thickness readings can be stored in the
memory.
Measuring units :
Frequency :
Display :
Memory :
RS232 :
Sound Velocity :
Auto power off :
Power Supply :
Alarm limit setting :
Battery Life :
Dimensions :
Weight :
Characteristic
Straight Probe
Right Angle Probe
For testing thin materials
For testing thick materials with Rough Surfaces
High Temp up to 300 deg C
Test and Measurement Instruments C.C.
www.instrumentsgroup.co.za
Email:
Tel: 0027 (0)11 683 4365
top and bottom
mm
5 MHz
4 digit LCD
10 readings
no
5 Preset Sound Velocities
yes
2 x 1.5 AA Alkaline
no
250 hours per battery set
126 x 68 x 23 mm
170g
t.m.i@iafrica.com
Page 1 of 2
surfaces.