Table of Contents
Advertisement
Chapter 5. Changing Various Settings
Getting the Master Tune
Setting To Be Remembered
While the Power Is Turned Off
Normally, the Master Tune setting reverts to the default
value when the power is turned off. However, you can set
the MP-70 so that the Master Tune value is retained even
while the power is turned off.
1.
Hold down the [SPLIT] button, and press the [TWIN
PIANO] button.
The MP-70 switches to the function mode.
2.
Press the [METRONOME/COUNT IN] button.
The button's indicator flashes.
The following appears in the display.
fig.
3.
Press the [REC] button.
The Master Tune setting is saved.
When Memory Backup is finished, the display and
buttons return to their normal appearance.
→ To return the Master Tune value to the initial setting, set the
value to "440.0 Hz" in the Master Tune settings screen (p. 33;
set the value so that "40.0" is indicated in the display), then
carry out Steps 1-3.
36
Using the V-LINK function
Connecting the MP-70 to a V-LINK compatible image device
allows you to control the images with the MP-70.
V-LINK
V-LINK (
) is a function that allows music and
images to be performed together. By using MIDI to connect
two or more V-LINK compatible devices, you can easily
enjoy a wide range of visual effects that are linked to the
expressive elements of a music performance.
How to Use the V-LINK
1.
Hold down the [SPLIT] button, and press the [TWIN
PIANO] button.
The MP-70 switches to the function mode.
2.
Press the [RIGHT] button.
The button's indicator flashes.
The following appears in the display.
fig.
Display
Descriptions
The V-LINK function is switched off.
OFF
The V-LINK function is switched on.
On
You can control images using the twelve keys at the left
end of the keyboard.
Power-up default setting OFF
3.
Press the [-] and [+] buttons to switch the V-LINK
function on and off.
You can control images using the twelve keys at the left
end of the keyboard.
While V-LINK is switched on, the following will appear
in the display.
* While V-LINK is switched on, no sound is produced when you
press any of the twelve keys at the left end of the keyboard.
How to exit function mode
4.
Press the [SPLIT] or [TWIN PIANO] button.
The button's indicator returns to its original state.
Advertisement
Table of Contents
