McAfee NTBA T-200 Quick Start Manual
  1. Manuals
  2. Brands
  3. McAfee Manuals
  4. Server
  5. NTBA T-200
  6. Quick start manual
McAfee NTBA T-200 Quick Start Manual

McAfee NTBA T-200 Quick Start Manual

Network security platform
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1
Install the mounting rails
Position the mounting rails correctly and install them at same levels.
At the front of the rack, position one of the mounting rails so that its mounting bracket aligns with the
a
required rack holes. Clip the rail into the rack.
Figure 1 Slide rail installation
At the back of the rack, pull the back mounting-bracket (extending the mounting rail) so that it aligns with
b
the required rack holes.
Clip the rail to the rack and secure it.
c
Repeat these steps to secure the second mounting rail to the rack.
d
Make sure that the mounting rails are at the same level on each side of the rack.
e
Make sure that you follow the safety warnings. When identifying where you want the NTBA
Appliance to go in the rack, remember that you should always load the rack from the bottom
up. If you are installing multiple NTBA Appliances, start with the lowest available position first.
NTBA Appliance T-200 and T-500 Quick Start Guide
McAfee Network Security Platform
Revision B
1

Advertisement

Table of Contents
loading

Related Manuals for McAfee NTBA T-200

Summary of Contents for McAfee NTBA T-200

  • Page 1 NTBA Appliance T-200 and T-500 Quick Start Guide Revision B McAfee Network Security Platform Install the mounting rails Position the mounting rails correctly and install them at same levels. At the front of the rack, position one of the mounting rails so that its mounting bracket aligns with the required rack holes.

  • Page 2: Install The Ntba Appliance In The Mounting Rails

    Install the NTBA Appliance in the mounting rails With help from another person, lift the NTBA Appliance so that the side rails at the back of the NTBA Appliance are aligned with the mounting rails in the rack, then push the NTBA Appliance into the mounting rails until it stops.
  • Page 3 Back panel features and indicators T-500 The back panel features and indicators of NTBA Appliance T-500 are as follows: Figure 3 Back panel — T-500 Item Description System identification indicator light Console port Video connector USB ports (4) Management port Remote management module NIC Collection ports (2-copper) Power supply 1...

  • Page 4: Hardware Specifications

    Item Description Video connector USB ports (4) Management port Remote management module NIC Collection ports (4-copper) Power supply 1 status indicator light Power supply 1 Power supply 2 status indicator light Power supply 2 Hardware specifications Table 1 Hardware specifications Appliance model T-200 T-500...
  • Page 5 Cabling the T-500 NTBA Appliance The T-500 NTBA Appliance has four collection ports and one management port. The collection ports connect to the network infrastructure that generates the NetFlow data from the routers and McAfee Network Security Sensor (Sensor)s. ®...
  • Page 6 Cabling the T-200 NTBA Appliance The T-200 NTBA Appliance has four collection ports and one management port. The collection ports connect to the network infrastructure that generates the NetFlow data from routers and McAfee Network Security Sensor (Sensor)s. ® The four collection ports can be used to distribute the NetFlow data from different routers and Sensors.

  • Page 7: Connect The Power Cables

    (PDU). When you connect power to the appliance, the appliance will immediately turn on and boot up. Install the Manager software Prepare the system according to the requirements outlined in the McAfee Network Security Platform ® Installation Guide and McAfee Network Security Platform Release Notes.
  • Page 8 Manager and the device. The Add Device Wizard window is displayed after the Manager Initialization Wizard is completed. McAfee recommend to first add an Appliance to the Manager. Select Devices | <Admin Domain Name> | Global | Add Device Wizard.
  • Page 9 Using the command line interface (CLI), enter the necessary information for the Appliance identification and communication as described in the McAfee Network Security Platform Installation Guide. If you set up the NTBA Appliance first, after the Manager addition, you need to return to the Appliance to reset the shared secret key and begin Appliance-to-Manager communication.
  • Page 10 The required settings for HyperTerminal are: Name Setting Baud rate 115200 Number of Bits Parity None Stop Bits Control Flow None Run the HyperTerminal. At the logon prompt, log on to the NTBA Appliance using the default user name admin and password admin123.

  • Page 11: Verification Process

    A password must be between 8 and 25 characters, is case-sensitive, and can consist of any alphanumeric character or symbol. McAfee strongly recommends that you choose a password with a combination of characters that is easy for you to remember but difficult for someone else to guess.

  • Page 12: Upgrade Ntba Appliance Software

    Click Close Window once the download is complete. Copyright © 2017 McAfee, LLC McAfee and the McAfee logo are trademarks or registered trademarks of McAfee, LLC or its subsidiaries in the US and other countries. Other marks and brands may be claimed as the property of others.

This manual is also suitable for:

Ntba t-500

Table of Contents