IDEALI TD-04 Instruction Manual

Industrial blender

Advertisement

INSTRUCTION MANUAL
INDUSTRIAL BLENDER - TD04-16147-701
* Please read these instructions carefully before operation this appliance.

IMPORTANT SAFEGUARDS

When using electrical appliances, basics safety precautions should always be observed
including the following:
- Before connecting your blender check if voltage of your power system
corresponds to the same specified on the appliance.
- To protect against risk of electrical shock, do not put cord, plug, base or
motor in water or other liquids.
- Never connect two or more appliances in the same plug.
- When not in use, unplug the blender.
- Avoid starting blender empty.
- Avoid contact with moving parts because blades are sharp. Handle carefully.
- Keep hands and utensils out of container while blending to prevent the
possibility of severe personal injury and or damage to blender. A plastic spatula may be
used but only when blender is "NOT RUNNING".
- Only remove the container when blender "COMPLETELY STOPPED".

INSTRUCTIONS FOR USE

- Blender control is made by switch ( ON - OFF)
- It is recommended to cut food in small pieces and maintain food below frieze
height to avoid spilling.
- To start blender place small quantity of food before connecting it, and afterwards complete
container.
- When blender is running do not remove the lid.
- If blender action stops, turn blender off. Remove lid and use a plastic spatula
to push mixture toward blades. Replace lid and continue.

CLEANING PROCEDURE

- Clean container (cup) with liquid soap and water filling to half capacity.
- Turn on blender for some seconds.
- Turn off blender, empty the container and rinse it.
- Unplug blender clean body and external cup with a wet cloth.
- Do not use harsh detergent or chemical products for cleaning.
- Never use water jet or immerse appliance in water.
- Wipe off appliance switch using a dry cloth and wait at least half an hour before re-
conneting to the main power outlet.
CROYDONMAQ INDUSTRIAL LTDA.
Estrada São Lourenço, 891 - Capivari
Duque de Caxias - RJ / Brasil - CEP 25243-150
Phone: 55 21 2777- 8100 / 55 21 2777-8106
e-mail: croydon@croydon.com.br - www.croydon.com.br
TD04
TD04
TD04-16147-701

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TD-04 and is the answer not in the manual?

Questions and answers

Summary of Contents for IDEALI TD-04

  • Page 1 INSTRUCTION MANUAL INDUSTRIAL BLENDER - TD04-16147-701 * Please read these instructions carefully before operation this appliance. IMPORTANT SAFEGUARDS When using electrical appliances, basics safety precautions should always be observed including the following: - Before connecting your blender check if voltage of your power system corresponds to the same specified on the appliance.
  • Page 2: Technical Data

    Shaft Adapter 37.157-3 Allen Screw 1/4” Screw 1/4” MOTOR Washer 9.410-3 Retainer 37.355-3 Flange of coupling 37.201-3 Body 4.081-3 Ideali Label 37.116-3 Switch 37.312-3 60 HZ Motor 4.056-3 Container's Base 4.084-3 Cord Connection 3.000-3 Foot Container Screw 3/16” Assy. without socket 4.109-3...

This manual is also suitable for:

Td04-16147-701

Table of Contents