Viatek Mighty Jump MJ01 Instructions

Model MJ01
Made in China
USE:
IMPORTANT! DO NOT CHARGE MIGHTY JUMP BEFORE
FIRST USE! Unit comes precharged from factory.
NOTE: Before use make sure all electrical
accessories are turned off.
Before starting these steps, you can place Mighty Jump in any cup holder for easy use.
Step 1: Test the Battery. Connect the cigarette lighter end of the Mighty Jump cord into the cigarette
lighter socket of your vehicle. Make sure that the switch on the cigarette lighter end of the cord
is in the rearward position. Then turn the key in the ignition to the accessory position, usually one quarter
turn of the key. If you get a GREEN LIGHT on the cigarette lighter end of the plug continue. If not
your battery may be damaged and unable to charge.
Step 2: Test Electrical System. Leaving the Mighty Jump plugged into your vehicle, turn on the
headlights. Leave them on for 10-15 seconds. Turn them off. If the GREEN LIGHT on the cigarette
lighter end of the plug stays on, move to Step 3. If NO GREEN LIGHT IS ON your electrical system
may be damaged, professional help may be needed.
Step 3: Charging the Vehicle. Move switch to the forward position. Connect the plug end of the
cord into outlet on the top of the Mighty Jump. The GREEN LIGHT will appear brighter, this
means the battery is accepting the charge from the Mighty Jump. Wait 10 minutes. DO NOT EXCEED
15 MINUTES OF CHARGE TIME WHEN CHARGING YOUR VEHICLE AS THIS MAY CAUSE
THE MIGHTY JUMP UNIT TO OVERHEAT. After 10 minutes have passed move to Step 4.
Step 4: Start the Vehicle. Now start your vehicle, do not pump the gas while you are starting your
vehicle. Pumping the gas could cause engine flooding and stop the vehicle from starting.
Step 5: Charging the Mighty Jump. Charge the Mighty Jump only after your vehicle is operating,
and running smoothly. With the cords still connected, push the switch on the cigarette lighter end
down (rearward). The green light will be illuminated. Leave your vehicle running with the Mighty
Jump plugged in for about 45 minutes.
Step 6: Storing. Once your vehicle and Mighty Jump are charged, disconnect all plugs. You can
store your Mighty Jump in your glove box, trunk, or cup holder. We recommend you do not store the
Mighty Jump plugged in.
USE ONLY AS DIRECTED
DO NOT DISCARD IN FIRE
KEEP OUT OF REACH OF CHILDREN
AVOID EXCESSIVE HEAT EXPOSURE.
The Battery Life of Mighty Jump is 5 Years (similar to a standard battery).
Emergency Vehicle Jump Starter
Mighty Jump is designed for 4,6 or 8 cylinder gas powered cars, light trucks & SUVs that use
a 12 volt electrical system. The Mighty Jump WILL NOT provide ample energy to bring a
defective battery back up to a usable recharge level. The testing procedure, where you simply
insert the power adapter into your power port accessory, is designed to tell you if your car
battery will or can accept the charge, before you begin the process. If you DO NOT get a green
light, your Mighty Jump will not work and it tells you that your car battery needs professional
servicing and/or possible replacement.
SPECIFICATIONS:
• Rating: 12V 6A DC
• 3 ft. cord
Read Instructions
Before Operating