Naming The Settings (Global Name); Setting The Types Of Connected Devices (Output Select) - Roland VG-99 Owner's Manual

Naming the Settings (GLOBAL
NAME)
You can assign up to ten user names, each containing up to eight
characters. For example, you could create names that suggest the
gear used in a certain setting or a place where you perform.
1.
Press [GLOBAL].
2.
Press PAGE [ ] to display Page 1.
3.
Press [F3] (NAME).
4.
Set the name using PAGE [
[F5].
Function Button Explanation
[F1] (INSERT) Insert a space at the cursor location.
Delete a character. The characters that
[F2] (DELETE)
follow get shifted to the left.
[F3] (SPACE) Input a space at the cursor location.
Switch between uppercase letters and
[F4] (A0!)
lowercase letters.
Switch between uppercase letters, low-
[F5] (A<=>a)
ercase letters, numbers, and characters.
Chapter 4 Global Device Settings (SYSTEM)
Setting the Types of Connected
Devices (OUTPUT SELECT)
You can match the VG-99's output response to that of the connected
device. Making this setting helps keep differences in sound qualities
respective to the connected device to a minimum.
1.
2.
3.
] [ ] and [F1]–
Press [GLOBAL].
Press PAGE [ ] to display Page 1.
Use [F4] (OUTPUT SELECT) or the F4 knob to
set the type of device to be connected to the
MAIN OUT jacks.
Value Explanation
Use this setting when connecting to Ro-
JC-120
land's JC-120 guitar amp.
Use this setting when connecting to a
SMALL AMP
small guitar amp.
Use this setting when connecting to the
guitar input of a combo amp other than
the JC-120 guitar amp (where the amp
and speaker or speakers are combined in
COMBO AMP
a single unit).
* Depending on your guitar amp, you
may be able to obtain good results with
the JC-120 setting.
Use this setting when connecting to the
guitar input of a stack-type guitar amp
STACK AMP
(where the amp and speaker or speak-
ers are separated).
Use this setting when connecting to the
JC-120 Return
RETURN of a JC-120.
Use this setting when connecting to the
COMBO Return
RETURN with a combo amp.
Use this setting when connecting to the
RETURN of a stack amp or the INPUT
of a rack mounted power amp.
STACK Return
Set to STACK Return also when using a
guitar power amp and speaker cabinet
combination.
Use this setting when using head-
phones or when connecting to a multi-
track recorder for recording.
LINE/PHONES
* When using COSM Speaker cabinets,
use the LINE/PHONES setting.
47