Advertisement
Play from Bluetooth-enabled devices
1
On the speaker, press and hold
for 2 seconds.
» The LED indicator flashes blue.
2
On your Bluetooth device, enable Bluetooth and search for Bluetooth devices.
3
Select [PHILIPS BT3000] on your device to start pairing and connection. If necessary,
enter default password "0000".
» After successful pairing and connection, the speaker beeps twice, and the
LED indicator turns solid blue.
•
If you fail to find [Philips BT3000] for pairing, press and hold PAIRING for two
seconds to enter pairing mode.
After Bluetooth connection, you can control an incoming call with this speaker.
Button
Function
Press to answer an incoming call.
Press and hold for 2 seconds to reject an incoming call.
During a call, press to end the current call.
Note: Music play pauses when there is an incoming call.
BT3000_98_SUM_V1.0.indd 2
The product can be powered by either AC mains or batteries.
4 x AA
2"
PHILIPS BT3000
4
Play audio on the Bluetooth device.
Note:
•
•
Press and hold
for 2 seconds to turn on the speaker.
»
The LED indicator flashes blue.
»
If the battery is low, the LED indicator flashes red.
Keep away from any other electronic device that may cause interference.
Before connecting another Bluetooth device, disconnect the current device
first.
Enter Bluetooth pairing mode;
Disconnect Bluetooth connection.
ON/OFF
2"
Note: To switch to audio-in mode, make sure that there
is no Bluetooth connection, or music playback through
Bluetooth is paused.
Specifications
Amplifier
Total Output Power
2"
Signal to Noise Ratio
Audio-in Input
Bluetooth
Bluetooth Version
Supported Profiles
Range
General information
Power Supply
- AC Power
(power adapter)
- Battery
Operation Power
Consumption
Dimensions - Main Unit
(W x H x D)
Weight - Main Unit
5 W
> 67 dB
600 mV RMS 20 kohm
V3.0
HFP, A2DP, AVRCP
10 m (Free space)
Brand name: PHILIPS;
Model: ICP12-050-1500D;
Input: 100-240 V~, 50/60 Hz, 0.3 A;
Output: 5 V
1500 mA;
4 x 1.5 V LR6 AA
1.95 W
280 x 121 x 93 mm
1.3 kg
8/3/2015 3:02:48 PM
Advertisement
