Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ino Plus and is the answer not in the manual?

Questions and answers

DEWET ANDERSEN
April 23, 2025

How do I get the setting mode?

1 comments:
Mr. Anderson
May 12, 2025

To access the setting mode on the VivaChek Ino Plus, press the power button to turn on the meter. The year will start flashing. Use the side button to adjust the year, then press and hold the power button until the meter beeps to set it. The meter will then shift to the next digit. Repeat this process to set the year, month, date, and time.

This answer is automatically generated

Alessandro Papi
February 11, 2025

come si accende

1 comments:
Mr. Anderson
February 12, 2025

The document does not explicitly state how to turn on the VivaChek Ino Plus meter. However, it mentions that the meter beeps when turned on, suggesting that pressing and holding the power button may turn it on.

This answer is automatically generated

shuaib
January 30, 2025

why do i struggle to set time and date

1 comments:
Mr. Anderson
May 14, 2025

It may be difficult to set the time and date on the VivaChek Plus because the process requires multiple steps: using the side button to adjust each digit and pressing and holding the power button until the meter beeps to confirm each setting. This must be repeated for each digit of the year, month, date, hour, and minute, which can be time-consuming and confusing.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for VivaChek Ino Plus

  • Page 2: Blood Glucose Monitoring System

    The VivaChek™ Ino Blood Glucose Control Solution is for use with the VivaChek™ Ino Plus Blood Glucose Meter and VivaChek™ Ino Strips as a quality control check to verify that the meter and test strip are working together properly, and that the...
  • Page 3: Table Of Contents

    TABLE OF CONTENTS Understanding Your Testing Tools………………………………….. Your Meter System Overview………………………………………….. Your Meter Display………………………………………………………. Important Safety Information……………………………………………… 4 Limitations…………………………………………………………………... 5 Setting Up Your System……………………………………………….. 6 Set the Time and Date…………………………………………………..6 Pairing your meter with the Smartphone………………………………. 7 Syncing to send results wirelessly to the app…………………………… 7 Taking a Test……………………………………………………………..
  • Page 4: Understanding Your Testing Tools

    CHARPTER 1: UNDERSTANDING YOUR TESTING TOOLS Your Meter System Overview The VivaChek™ Ino Plus Blood Glucose Meter and Strip...
  • Page 5: Your Meter Display

    All of the segments should be clear and exactly like the picture below. If not, contact VivaChek Customer Support at 800-951-8430 (7 days a week. 9 a.m.-5 p.m. Eastern Time) for help. Please contact your health care professional if you need help.
  • Page 6 Indicates that a low test result may cause hypoglycaemia. Bluetooth Sound on or off Notes: Your VivaChek™ Ino Plus meter is pre-set with beep sound function, the meter will beep when: turn on the meter. • the test strip is inserted and ready to apply blood or control solution.
  • Page 7: Important Safety Information

    Check the expiration dates and discard dates on your test strips vial label • (or on the foil pouch) and control solution bottle label. Use only VivaChek™ Ino test strip with your VivaChek™ Ino Plus meter. • Use only VivaChek™ Ino control solution with your VivaChek™ Ino Plus •...
  • Page 8: Limitations

    Blood samples from patients in shock, or with severe dehydration or from • patients in a hyperosmolar state (with or without ketosis) have not been tested and are not recommended for testing with VivaChek™ Ino Plus Blood Glucose Monitoring System. The VivaChek™ Ino Plus Blood Glucose Monitoring System should not be •...
  • Page 9: Setting Up Your System

    You will hear a long beep. Pairing your meter with the Smartphone Pairing prepares your VivaChek™ Ino Plus Meter and Smartphone to communicate with each other. The devices must be within 5 meters of each other to pair and sync.
  • Page 10: Pairing Your Meter With The Smartphone

    4. Look for a device named VivaChek. This is your meter. 5. Tap on the entry that represents your VivaChek™ Ino Plus meter. 6. Enter your meter passcode using the keypad. The passcode is the last 5 digits from the Serial Number on the back of your meter.
  • Page 11: Taking A Test

    Year-Month format. 2019/01 indicates January, 2019. Your VivaChek™ Ino test strips have 4 months shelf life after you first open the test strip vial. Write the discard date on the vial label when you first open it. Make sure the test strip does not appear damaged.
  • Page 12: Getting A Blood Drop And Testing

    Getting a Blood Drop and Testing Here is an example of how to use a VivaChek™ Safety Lancet for fingertip blood sampling. If you use a different single-use auto-disabling safety lancet or lancing device, please follow the manufacturer’s instructions. Carefully rotate and pull off the protective cap.
  • Page 13: Discard The Used Test Strip

    Immediately touch the tip of the test strip to the drop of blood. The blood pulled into the test strip through the tip. Make sure that the blood sample has been fully filled the check window on the strip tip. Hold the tip of the test strip in the blood drop until the meter beeps.
  • Page 14: Testing With Control Solution

    • Do not change your medication therapy based on VivaChek™ Ino Plus test result before consult your health care provider. If you want to mark your result (only in Advanced Mode (L-2)) you will need •...
  • Page 15 • Your test result does not match with how you feel • About the Control Solutions Only use VivaChek™ Ino Control Solutions (1, 2 or 3) to practice on the • system. • Your meter automatically recognizes the control solution.
  • Page 16 Note: Do not apply control solution to the test strip directly from the bottle. Immediately touch the tip of the test strip to the drop of control solution. The control solution is pulled into the test strip through the strip tip. Note: If the control solution sample does not fill the check window, do not add a second drop.
  • Page 17: Using The Meter Memory

    (or the foil pouch). • Make sure the control solution was mixed well. • Confirm that you are using VivaChek™ Ino brand control solution. • Make sure that you followed the test procedure correctly. After checking all of the conditions listed above, repeat the control solution test with a new test strip.
  • Page 18: Maintenance And Troubleshooting

    Use only Clorox Healthcare Bleach Germicidal Wipes, which has been proven to be safe to use with the VivaChek™ Ino Plus Blood Glucose Meter. Cleaning is part of your normal care and maintenance and should be performed...
  • Page 19 Clorox Healthcare Bleach Germicidal Wipes containing Sodium hypochlorite 0.55%, which has been proven to be safe to use with the VivaChek™ Ino Plus system. Clorox Healthcare Bleach Germicidal Wipes are available through CLOROX PROFESSIONAL PRODUCTS CO.
  • Page 20: Troubleshooting Guide

    Customer Support for help. If you have questions about cleaning or disinfecting, or if you see evidence of physical damage, contact VivaChek Customer Sopport at 800-951-8430 (available 7 days a week, 8 a.m.- 5 p.m. Eastern Time). Please contact your health care professional if you need help.
  • Page 21 Please contact your health care professional if you need help. Repeat test apply enough Insufficient sample. sample to fill the test strip check window. Replace new batteries. Indicates a low battery. Test result above Wash and dry your hands well and 600 mg/dL.
  • Page 22: Symptoms Of High Or Low Blood Glucose

    Symptoms of High or Low Blood Glucose You can better understand your test results by being aware of the symptoms of high or low blood glucose. According to the American Diabetes Association, some of the most common symptoms are: High blood glucose Low blood glucose (Hyperglycemia): (Hypoglycemia):...
  • Page 23: Technical Information

    CHAPTER 5: TECHNICAL INFORMATION System Specifications: Feature Specification Measurement range 45 to 600 mg/dL Result calibration Plasma-equivalent Sample Fresh capillary whole blood Sample volume: 0.8 µL Test time 5 seconds Power source Two AAA LR03 1.5V batteries Glucose units of measure The meter is pre-set to milligrams per deciliter (mg/dL) Memory Up to 1000 records with date and time...
  • Page 24: Warranty

    Warranty Please complete the warranty card that came with this product and mail it to VivaChek Laboratories, Inc. 913 N market Street Wilmington, De, 19801, USA If the meter fails to work for any reason other than obvious abuse within the first five (5) years from purchase, we will replace it with a new meter free of charge.

Table of Contents

Save PDF