Subscribe to Our Youtube Channel
Summary of Contents for Gunbox SK-1
- Page 1 The most innovative gun safes on the planet! THE GUNBOX – SK-1 Biometric + RFID + Bluetooth + Access Control...
-
Page 2: Package Contents
Package Contents: Gunbox SK-1 2 – RFID Key Cards 2 – RFID FOBs Power Supply Hex Keys Power Button/ RFiD Read Area Fingerprint Reader Latch Locations Base Plate... -
Page 3: Table Of Contents
Gunbox SK-1 with the bottom hanging slightly off the edge. Open the Gunbox SK-1 and keep it propped open. It is best to put a pillow or folded up blanket on the inside of the... - Page 4 Remove the nuts on the bottom of the Gunbox SK-1, (these should only be hand tight). You may need to use the large Hex Key provided to hold the bolts on the inside from turning while removing the nuts.
- Page 5 Press the front white emblem on the Gunbox SK-1, and a blue LED will begin to flash. With the blue LED flashing, place one of the preprogrammed RFiD tags that came with the Gunbox SK-1 up close to the front white emblem and the Gunbox SK-1 should open.
- Page 6 Press firmly on the Gunbox SK-1 until you feel both top and bottom latches close. Warning: If the Gunbox SK-1 is latched with only the top or bottom latch, it will not be as secure.
- Page 7 Downloading the App There is a free App provided for configuration of your Gunbox SK-1 with a version for both iOS and Android phones. To download the App, go to the iTunes Store or the Google Play store, depending on your device, search for SafeTech (no spaces) and download the SafeTech App.
-
Page 8: Connecting With Bluetooth
Connecting with Bluetooth To connect the Gunbox SK-1 to the App, press “Add Device” on the App and then press the front white emblem on the Gunbox SK-1. The blue LED will begin to flash on the Gunbox SK-1 and then turn solid when the phone connects to the Gunbox SK-1. -
Page 9: Unlock Password
Enter a 4-digit password and press “Save.” The slide under Password Enabled will show orange, and now after you press “Unlock,” the App will now require that you enter the 4-digit code before the Gunbox SK-1 opens up. To turn off this feature, press the slide under Password Enabled again and enter the 4-digit password. - Page 10 User Name The User Name is the name the Gunbox SK-1 uses to identify that your phone has opened the Gunbox SK-1. This is identified in the History Log, see History Log below. To make a change, press “User Name,” type in a different...
- Page 11 History Log The History Log shows a log of the last 100 openings of the Gunbox SK-1 using RFID, Fingerprint or the App. You WILL see a few logs once you receive your Gunbox SK-1. These logs are generated by our Quality department to ensure functionality.
- Page 12 RFID Tag Management RFID tags can be added to the Gunbox SK-1 using the App. To do this, press “RFID Tag Management” to get to the RFID Tag Management screen and then press “Add New Tag.” The Gunbox SK-1 will begin to beep twice repeatedly with a brief pause between each pair of beeps, the blue LED on the Gunbox SK-1 will begin to flash and the App will display the message, “Place a New RFID Tag on the Lock to Add it.”...
- Page 13 Share Code You can allow another person to open your Gunbox SK-1 at specific times or for a specific number of openings using a Share Code. To do this, press “Share Code” to open the Share Code screen. To give access a specified number of times, enter an 8-digit code on the top section and select the number of uses allowed.
- Page 14 Alarm or Audible Alarm. You will also need to set the Delay Time. The Delay Time is the number of minutes it will take for the alarm to set AFTER you have closed the lid. If the Gunbox SK-1 is tampered with during the Delay Time, the alarm will NOT be set and you will need to WAIT the allotted Delay Time in which you SET before it will arm.
- Page 15 Gunbox SK-1. Place your finger over the blue Fingerprint Reader LED and the Gunbox SK-1 will rapidly beep 3 times when it has read. Lift your finger and repeat 2 more times. When recorded, the Gunbox SK-1 will make 6 rapid beeps, and the App will indicate that your fingerprint has been stored to the Gunbox SK-1.
- Page 16 You can remove the Gunbox SK-1 from your App. To do this, press “Remove: (Gunbox SK-1 Name)” on the Settings screen. Press “Yes” on the warning pop up and the Gunbox SK-1 will be deleted. To add the Gunbox SK-1 again to the App you will need to press “Add Device”...
-
Page 17: Basic Functions
To use the speakers, plug in the Gunbox SK-1 (if it is not already plugged in). On your phone, go to the Bluetooth settings. Make sure that your phone has the Bluetooth turned on. On the Bluetooth Settings screen, you will be able to search for nearby Bluetooth devices. - Page 18 Adjusting the Firearm Holding Bracket There is a bracket designed to hold your firearm upright in the Gunbox SK-1. To adjust this bracket up or down, loosen the screw in the center of the bracket using a Philips screwdriver. Move the bracket to your desired location and tighten the screw again.
- Page 19 Gunbox SK-1 or any contents stored within the Gunbox SK-1. The user is warned that it is possible for an unauthorized party to access the Gunbox SK-1 and does not make claims that it is invulnerable to attack.
- Page 20 a. The App along with the software, firmware or hardware associated with this App’s connecting hardware i.e. doorlocks, deadbolts, padlocks, lock-boxes, etc. may contain errors, bugs, or other problems that may result in failure. You acknowledge that you are using the products at your own risk and the licensor makes no representations or warranties pertaining to the functionality of the App.
- Page 21 RPH Engineering. Download the App to get all the features The Gunbox SK-1 has to offer. What kind of battery does the Gunbox SK-1 have? How long will a charge last before it needs to be recharged? o The Gunbox SK-1 has an internal rechargeable Lithium Polymer battery. The Gunbox SK-1 charge will normally last 1 year before it will need to be charged again.
-
Page 22: Troubleshooting
Trouble Shooting No lights come on when I press the front white emblem o Make sure the battery is not dead. Plug the Gunbox SK-1 in to charge. The battery will take 2 hours to fully charge. o Make sure there is power coming from the charger. - Page 23 ONE (1) Year period. An RMA MUST be issued before a Gunbox unit can be sent back to us for repair. Claims shall be made under this warranty by calling 801-331-8655 or via email at warranty@thegunbox.com.
- Page 24 SAFE STORAGE. QUICK ACCESS. The Gunbox, LLC www.thegunbox.com techsupport@thegunbox.com - 801-331-8655...
Need help?
Do you have a question about the SK-1 and is the answer not in the manual?
Questions and answers