Mi Casa Verde VERA3 Installation Manual

~
mico.so.verde
THANKYOU
FOR PURCHAslNG VERA3 BY MI CAS A VERDE!

TO GET STARTED

Use the larger power adapter marked "Sunny" to power
your home network
(instructions below). The battery pack comes with a cable to con neet to Vera3 and a cable to
re-charge the battery pack. Charge the included battery pack with the power adapter that has
red and green indicators.
if you have previously instalied devices, such as a door loek.
NOW THAT VERA ~SPOWERED ON V'S'T
The set-up wizard will automatically
step, through setup. If you're prompted
tions for the free upgrade. Running the newest firmware
latest features.
SETTING UP VERA3 AS THE MAIN ROUTER OR
CONNECTING TO AN EXISTING ROUTER
Vera3 has a built-in Wi-Fi and can act as an access point. To use it, conneet Vera3 as shown in
the diagram below and wait 60 seconds for the Z-Wave light to come on. If you connected
Vera3's WAN port to a valid internet connection,
solid within about 60 seconds. Then, Vera3 will share the internet connection
your computer you will find a secure, encrypted Wi-Fi network with the name "vera" followed
by your Vera3's serial number (the serial number is also found on the bottom ofthe Vera3 hard-
ware). To join this network, you will need the password printed on the bottom of your Vera3.
Once connected to Vera3 over Wi-Fi, you can access Vera3's setup page at
Switch, Router, DSUCable Modem
with the included Ethernet cable (preferred),
You may need to use it to power Vera3 during the inclusion process
http://micasaverde.com/vera3
find Vera3 on your network, and then guide you, step-by-
to upgrade your firmware, please follow the instruc-
Vera3. Conneet Vera's WAN port to
or con neet using Wi-Fi
ensures you have access to all the
Vera3's WAN light on the front will come on
_ .,; __ '- __ oiÎ
Power WAN WIfi SeMOe LAN Z-Wave USB1
USB
over Wi-Fi. On
http://192.168.81.1
USB2
WalfOutlet