Inserting A Step - Boss MICRO BR DIGITAL RECORDER MICRO BR Owner's Manual

Starting measure
This specifies the measure at which the
pattern selected for the current step is to
begin playing.
fig.04-520
Step 1 Step 2
Intro Verse
(4 measures) (4 measures)
Starting
Measure
001 005
Set the starting measure
to "007" in step 2
Step 1
Intro
(6 measures)
Starting
Measure
001 007
005
Pattern number
This specifies the pattern. As shown in the
following illustration, specify a pattern for
each step.
fig.04-530
Step 1 Step 2
Verse
Intro (2 measures)
(1 measure)
Tempo: 120.0
Starting
Tempo: 110.0
Measure
001 003
Beat
This indicates the beat for the pattern
selected in the current step.
Tempo
This sets the tempo at which the pattern
selected for the current step is to be
performed.
Range: 25.0–250.0
009
Step 2
Verse
(2 measures) (2 measures)
009
Step 3
Fill (1 measure)
Tempo: 110.0
004
Section 4. Using rhythm

Inserting a step

Here's how to insert a new step at the current
step.
fig.04-550
Insert
Verse
Step 1 Step 2
Intro Verse
Step 1 Step 2
Intro Verse
1.
Perform steps 1 through 7 of "Specifying
the pattern for the first measure" (p. 83),
to select the song arrange you want to
edit.
2.
Use CURSOR [
[+] to select the position (step number) at
which you want to insert a step.
fig.Disp-ar-ins.eps
3.
Press CURSOR
4.
Press [TR1] (INS).
The display will indicate "Insert!" and the
selected step will be copied and inserted.
Step 3
Fill
Step 3 Step 4
Verse Fill
] [ ] and VALUE [-]
.
85