Advertisement
Table of Contents
INITIAL USE
Ensure that TD selection switch is in correct position (INT/EXT).
Switch on at back panel.
Track screen displayed. Press for relevant method of measurement.
Press EXIT for setup.
NOTE
It is essential that a new TST is charged for 14 hours.
For AC power operation, connect power adapter.
For further information on operation & applications see
TST Operators Handbook (Part number 34274).
BUTTON FUNCTIONS:-
TST Quick Reference Guide
Button
Function
Track
Dial & Electronic
Click and Cam
Impulse Tool
Clutch Tool
Stall Tool
Unit selection
RESET/PRINT
PRINT/NO PRINT
Exit
Issue 1
15.01.2002
Part Number 34278
(English)
Advertisement
Table of Contents
Summary of Contents for norbar TST Series
- Page 1 Issue 1 15.01.2002 Part Number 34278 (English) TST Quick Reference Guide INITIAL USE Ensure that TD selection switch is in correct position (INT/EXT). Switch on at back panel. Track screen displayed. Press for relevant method of measurement. Press EXIT for setup. NOTE It is essential that a new TST is charged for 14 hours.
- Page 2 SMART transducer lost memory; return to Norbar. Menu 82. ‘CLOCK & SETTINGS NOT INITIALISED’ displayed when power on. Back up battery has failed. Replace or return to Norbar (see handbook). Password lost. Contact Norbar quoting coded number. on password menu.
Need help?
Do you have a question about the TST Series and is the answer not in the manual?
Questions and answers