Didactum Monitoring System 500 II DC Quick Start Manual

Thank you,
for choosing Didactum`s IP-based remote monitoring solutions.
By using high-quality components, it can be ensured that the Didactum products for many years to work properly.
The production of Didactum`s monitoring systems takes place within the European Union (E.U.) and are subject to continuous quality assurance.
For the manual for your Didactum Monitoring System and other important information about the sensors, CAN devices and expansion units, please
visit our knowledge base:
https://www.monitoring-hardware.com/
Quick Start Guide:
Connection scheme of Didactum Monitoring System 500 II DC:
Fig.: Here you see the connections of your 48VDC remote monitoring device 500 II-DC.

Assign the IP address of your Didactum remote monitoring unit

All networked Didactum monitoring units have a built-in web interface. To access this webGUI, you just have to use an web browser.
In the command line of your web browser, please insert the IP address of your Didactum monitoring unit. The default IP address of
this device is 192.168.0.193
Note: Didactum relies on HTML5. Please make sure that you are using the latest version of your web browser.
All networked Didactum monitoring systems were tested under Chrome, Firefox and Safari. Please check that you are using latest version of Java.
If necessary, you can download here: http://www.java.com

Default settings of your monitoring device:

DHCP Client
Hostname
IP address of device
Network mask
Broadcast
Gateway
Primary DNS
Didactum Monitoring System 500 II Quick Start Guide © Didactum® 01/2018
disabled
didactum
192.168.0.193
255.255.255.0
192.168.0.1
192.168.0.255
192.168.0.1