Forcepoint X10G Quick Start

READ FIRST!

Before you begin

Plan your deployment before setting up the X10G.
You can access documentation at:
http://www.forcepoint.com
1 Verify Contents
Cat 5 Cables (2) Power Cables (4)
Null Modem Cable Switch Serial Cable
Sliding Ready Rail Kit
Blades are in separate cartons
Available options include:
· X10G HA Kit
· X10G Optical Kit
· X10G Mirror Port Expansion Kit
Contact your Forcepoint account representative.
Contact Forcepoint Technical Support if any items are missing.
2 Rack and Install
See the Rack Installation Instructions in the Sliding
Ready Rail Kit.
Note: 4 persons required for racking chassis.
After the chassis has been racked, slide blades into the
slots of the chassis starting in slot 1 (top left slot).
Note: Blades slide smoothly when hanging from the top rail.
Do not force.
Forcepoint X10G™ Quick Start Poster
This poster describes setup steps for the X10G chassis and blade system.
3 Connect to Network
With VLAN
Supports switch high availability (HA) using VLAN trunking and Spanning Tree Protocol (STP).
Without VLAN
Supports switch high availability (HA) using Access Ports and Spanning Tree Protocol (STP).
SFP+ Cables (2)
Switch With VLAN
A1 Te1/2/1 or Te1/2/2 10G interfaces carry blade server management
A1
and user tra c using VLAN trunking.
See the X Series Switch Configuration Guide to perform initial switch
DVD Drive
configuration.
A2 Te1/2/1 or Te1/2/2 10G interfaces can also be used to carry blade
A2
server management and user tra c using VLAN trunking.
See the X Series Switch Configuration Guide to perform initial
switch configuration.
A1
Gb STK
A1 B1 C1
B
A
1 Y
B A
Y
2
Link
ACT
17
18
19
20
CONSOLE
P1 and P2 are trunked together with VLAN enabled.
X10G Network Diagram
See back for steps to complete your setup
4
10GE SFP+MODULE
Link/Act Link/Act
A2
CMC1 KVM CMC2
1 2 3
4 5 6
7 8 9
1 2 3 4 5 6
C2 B2 A2
Firewall
B
A
1 Y
A B
Y
2
Link
ACT
17
18
19
20
CONSOLE
Internal
Network(s)
Mail Server
SFP+ Cable
Without VLAN
A1 Te1/2/1 or Te1/2/2 10G interfaces carry blade server management and user
tra c using Access Ports.
See the X Series Switch Configuration Guide to perform initial switch
configuration.
A2 Te1/2/1 or Te1/2/2 10G interfaces can also be used to carry blade server
management and user tra c using Access Ports.
See the X Series Switch Configuration Guide to perform initial switch
configuration.
A1 Te1/2/2
Gb STK
Internet
A1 Te1/2/1
Forcepoint Security Manager
Policy Broker
Policy Server
A1 Te1/2/2
End Users
Log Database
Microsoft® SQL Server
Log Server
CMC1 KVM CMC2
1 2 3
4 5 6
7 8 9
1 2 3 4 5 6
A1 B1 C1 C2 B2 A2
B B
A A
Y Y
1 1
A2 Te1/2/1
B B
A A
Y Y
2 2
A2 Te1/2/2
Link Link
ACT ACT
17 17
18 18
19 19
20 20
CONSOLE CONSOLE
QSGM1K-100-RevJ