Download Print this page

Advertisement

Quick Links

E T C
S e t u p G u i d e
®
SmartStand
O v e r v i e w
Your SmartStand is an excellent addition to your Smart Solutions lighting package. Its ease of use,
sturdy composition, and adaptable design offer the perfect solution for your lighting support needs.
Safety Restrictions
• Your SmartStand can support a maximum total load of 30kg (66 lbs).
• Try to balance loads as much as possible when using a crossbar at the top of the SmartStand.
• When using the optional casters, SmartStand should only be set up on a level surface.
• Periodically check to verify that the steel cables inside of the support columns are in good
condition (no fraying, crimping, or rusting).
SmartStand Diagram
Below is a diagram of the SmartStand with its primary parts labeled. Please take time to familiarize
yourself with these terms as they are used consistently throughout this guide.
Top Locking
Knob
Middle Locking
Knob
C A U T I O N :
Corporate Headquarters
London, UK
Rome, IT
Holzkirchen, DE
Hong Kong
Service: (Americas)
Web:
www.etcconnect.com
7501M2200
S m ar t St a nd
Se tu p Gu id e
Slide-handle set
screw
Base Locking
Knob
Before placing any loads on the SmartStand, you must open the tripod stand and
set it firmly in place.
3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA
Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK
Via Pieve Torina, 48, 00156 Rome, Italy
Ohmstrasse 3, 83607 Holzkirchen, Germany
Room 605-606, Tower III Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong
service@etcconnect.com
(UK)
Copyright © 2011 ETC. All Rights Reserved.
Rev C
Released 2011-07
ETC intends this document to be provided in its entirety.
Leg
Support
Tel +44 (0)20 8896 1000
Tel +39 (06) 32 111 683
Fax +44 (0) 20 8752 8486
Tel +49 (80 24) 47 00-0
Fax +49 (80 24) 47 00-3 00
service@etceurope.com
(DE)
techserv-hoki@etcetcconnect.com
Product information and specifications subject to change.
Pag e 1 of 2
Slide
Locking Pin
Hand
Crank
Lock
Crank
Handle
Adjustable Leg
Locking Knob
Foot Step
Tel +608 831 4116
Fax +608 836 1736
Fax +44 (0)20 8896 2000
Tel +852 2799 1220
Fax +852 2799 9325
(Asia)
service@etcasia.com
El ect r on ic T he at r e Con t ro ls , I nc .

Advertisement

loading

Summary of Contents for ETC SmartStand

  • Page 1 • Your SmartStand can support a maximum total load of 30kg (66 lbs). • Try to balance loads as much as possible when using a crossbar at the top of the SmartStand. • When using the optional casters, SmartStand should only be set up on a level surface.
  • Page 2 Step 2: Tighten the base locking knob. Step 3: If your SmartStand has the optional casters installed, engage the locking mechanism on each of the casters. Step 4: If you are not using the optional casters, you may use the adjustable leg to...