Advertisement
Quick Links
Download this manual
See also:
User Manual
AVer CP Series
Quick Start Guide
Package Contents
AVer CP series
(65", 75", 86")
Stylus pen x 2
Remote control
Optional Accessories
1. Wall mount
2. Floor stand
3. OPS
Start Up
1. Connect the power cord to power port (100V - 240V, 50Hz/60Hz), then, plug into wall outlet.
65"
power port
Audio cable
VGA cable
Power cable x 3
(US, UK, EU)
USB cable (5M)
4. Wireless presentation receiver
Power cord
75"/ 86"
power port
2. Press rocker switch to enter standby status and the power indicator will turn to red.
Rocker switch
(next to the power port)
3. Next, press the power switch (located on the front panel) or the power button on the remote control to turn
on the interactive panel. If you have an OPS computer installed, it will turn on, too. The power indicator on
the front panel turns green when the system is fully started.
4. The main display screen will be shown as below.
Power cord
Power switch
(Located at front panel)
Advertisement
Related Manuals for AVer CP864I
Summary of Contents for AVer CP864I
-
Page 1: Quick Start Guide
AVer CP Series 75"/ 86" Quick Start Guide Package Contents power port Audio cable Power cord VGA cable 2. Press rocker switch to enter standby status and the power indicator will turn to red. AVer CP series (65”, 75”, 86”) -
Page 2: Wall Mount Installation
OPS Installation 5. Input Source Selection: The AVer CP supports a variety of input sources. Follow the steps below to select the different input sources. 1. Insert the OPS into the special slot on the rear of the interactive panel.
Need help?
Do you have a question about the CP864I and is the answer not in the manual?
Questions and answers