Advertisement
TIME MODULE CALIBER NH
Hour Hand
Second Hand
HOW TO SET THE TIME
1)Pull out the crown to the second click position.
2) Turn the crown to set hour and minute
hands. (Check that AM / PM is set correctly.)
3) Push the crown back into the normal position.
TO WIND UP THE MAINSPRING
a) Manual winding. Rotate the crown clockwise at
normal position. Wind turning the ratchet wheel
screw 8 times. It will start to move naturally after
shaking slightly.
b) To wind up with winding machine.
Full wind up conditions
・Rotary speed : 30 rpm
・Operating time : 60 rpm
WATCH
35
-
H
A
3
AND AUTOMATIC
60
55
50
40
35
30
60
55
50
40
35
30
Minute Hand
05
10
20
25
05
10
i.
20
25
Crown
ii.
Advertisement
Table of Contents
Related Manuals for Hydrogen NH35A
Summary of Contents for Hydrogen NH35A
- Page 1 WATCH TIME MODULE CALIBER NH AND AUTOMATIC Minute Hand Hour Hand Crown Second Hand HOW TO SET THE TIME 1)Pull out the crown to the second click position. 2) Turn the crown to set hour and minute hands. (Check that AM / PM is set correctly.) 3) Push the crown back into the normal position.
- Page 2 CAUTIONS WATER RESISTANCE OVERVIEW CARE AND PRECAUTIONS Each Hydrogen Watch is designed and manufactured to the highest of standards. In order to ensure optimal performance and longevity, please review the simple guidelines for care and precautions of your Hydrogen Watch.
Need help?
Do you have a question about the NH35A and is the answer not in the manual?
Questions and answers