Table of Contents
Related Manuals for Videocon WallCam
Summary of Contents for Videocon WallCam
- Page 1 WallCam NVR Quick Setup Guide V-Con Intelligent Security Pvt. Ltd. B-71 Phase VII, Industrial Area, Mohali -160055, Punjab (India) Toll Free No. 1800 137 0030 I Email : customercare.wallcam@videocon.com www.videoconwallcam.com...
-
Page 2: Table Of Contents
Important Safeguards and Warnings Do not place any heavy objects on the NVR. Do not spill liquid onto the NVR Please brush the printed circuit boards, connectors, fans, machine box and so on regularly. 4.4.3 Video Loss ..............................22 Before cleaning the equipment, please switch off the power supply and unplug it. 4.4.4 Alarm input ........................ -
Page 3: Production Introduction
1. Production Introduction ·Rs-485 interface which fulfills the alarm input and PTZ control. 1.1 Product overview ·Standard Ethernet network interface which fulfills the telecommuting function. ·IPC signal input function. The NVR series which is an outstanding digital surveillance product has been designed ·With USB interface, 3G and WIFI network connection ·Bluetooth Mouse. -
Page 4: Understanding Of The Rear Panel
2.3 Understanding of the rear panel Button name Mark Function Note: Below are rear panels of some of our representative models. Please take the real object as final, these are Just for reference Remove the cursor Add or decrease number during the user edit state Change the setting in the menu Surveillance pictures, into the single channel or multi-channel image surveillance. -
Page 5: Basic Operation
3. Basic operation 3.1 Login 3.3.1 Guide When the NVR boots up, the user must login and the system provides the corresponding functions with the user right. There are 3 user settings: Admin, Guest and Default. The This function can guide user to open ”Cloud service” → “QR code” → “Network config.” default password for Admin user settings is ‘null’... -
Page 6: Playback
3.3.2 Playback Play the video files in the hard disk. Select " desktop shortcut menu "→ "playback"→ "search"→"play" option will appear. Full screen Fast play Note: The hard disk that saves the video files must be set as read-write or read-only state. -
Page 7: Output Adjust
3.3.7 Digital Channel System Information menu items include:onekeyadd, Channel Management, ChannelStatus. 3.3.8 Version Info System Information menu include: Version, HDD Info, BPS, LOG, Online Users. 3.3.8.1 Version Displays the basic information such as hardware information, software version, MAC,issue date and Serial No and so on. Note 1: The Serial No is needed when using cloud technology, please enter the Serial No correctly for remote access otherwise you can’t login. -
Page 8: Bps
Picture 3.13 log information 3.3.8.5 Online User Look up the network user information in the local NVR. You can lock the user by selecting the user and then pressing disconnect button. The user will be locked until next boot-strap. Picture 3.11 hard disk information 3.3.8.3 BPS Displays the code stream Kb/S and hard disk capability MB/H in real time. -
Page 9: Main Menu
4. Main menu 4.2 Record After login in, on the right click of mouse, the shortcut menu will appear at the bottom of the screen. To enter the main menu interface, left click the mouse. Set recording parameter (main stream) and network parameter (extra stream) of video and audio signal. -
Page 10: Network
4.3 Network Picture 4.4 Recording Plan Picture 4.5 network setup Net Link Mod: Select automatically or enter IP address manually. Channel: Choose the corresponding channel number to set the channel. Choose all the IP address: Set the IP address. options to set all channels. Subnet Mask: Set the subnet mask code. -
Page 11: Alarm
(2) Go to main menu>>>System settings>>>>Network>>>Net service and select DDNS. If the alarm is turned on or the alarm linkage photos are taken, the same will be sent to Choose WallCam from dropdown. the given email address Mark on Enable. -
Page 12: Motion Detect
4.4.1 Motion Detect 4.4.2 Video Blind When system detects the motion signal that reaches the set sensitivity, the motion detect When the video image is influenced by outer environment or lighting and reaches the set function and the linkage function will be turned on. sensitive parameter, the video blind function and the linkage function is turned on. - Page 13 Set method: refer to Chapter 4.4.1. Motion Detect 4.4.4 Alarm input When the equipment obtains the external alarm signal, the alarm function is turned on. Picture 4.28 Abnormality Event Type: Choose abnormality type, support five matters Enable: Enable these three settings Less than: this item can be set only when matter type shows no disk space, set percentage (1-99).
- Page 14 Add: add new IP device for this NVR channel, there are 3 ways for adding IP address; 2. In channel type list, there are many channel type combinations available (as picture 4.30) a. Click“ + ” on any channel to search the IP device and add it In digital channels, the numbers under resolutions means the maximum IP camera or other b.
- Page 15 Picture 4.34 Vedio encode Delete [ x ] Click “Delete” or click “ ” to make IPC unbinding for the selected channel. Picture 4.36 System Management 4.5.3【Channelstatus】 Shows the maximum resolution of all digital channels, connected signal resolution 4.6.1 HDD Management and connection status.
- Page 16 Time title: means the selective state. Displays the system data and time in the 4.6.2 PTZ Configuration surveillance window. Channel title: means the selective state will display the system channel number in the surveillance window. Recording status: means the selective state will display the system recording status in the surveillance window.
- Page 17 Modify user: Modify the existing user attribute. Modify team: Modify the existing team attribute. Modify password: Modify the user password. You can set a password of 1-6 characters. The blank ahead or behind the char string is invalid. The middle blank in the char string is valid.
- Page 18 5. Network access settings and cloud technology introduction Delete user:Delete the current user. Choose the user that needs to be deleted .Click the delete user button. The factory default user cannot be deleted (Such as :Admin, User, 5.1 LAN access settings Default) Delete Group:Delete the current team as shown in Picture 4.42Click the Delete Group 1.
- Page 19 3. Choose the bit stream the to review D District: PTZ Control Can control PTZ, setting between the preset point, cruise, etc. E District: Adjust the information such as the color of the currently selected channel. F District:Monitor display area 5.2 Cloud technology functions and usage introduction A、Main features of cloud technology One step to remotely access your NVR over the Internet.
- Page 20 Sam e function as M ulti-window button in the front button panel Num eric Code input/num ber input/channel switch WallCam button Sam e function as button in the front panel Direction Sam e function as direction button in the front panel...
Need help?
Do you have a question about the WallCam and is the answer not in the manual?
Questions and answers