Table of Contents
Advertisement
Service manual
Updating software
Always make sure that you have updated the product
with the latest software version.
You find the latest software version on
See the P3 System Controller user manual for software
installation instructions.
Maintenance
Read the user manual before performing service or
maintenance on the product.
Failure to respect service and maintenance schedules
may cause damage that is not covered by product
warranties.
Cleaning the product
Warning! Do not use a high-pressure
water jet for cleaning. Take care not
to damage seals and wiring during
cleaning.
Warning! Disconnect from power
before cleaning.
Cleaning schedules vary depending on the
operating environment. It is therefore impossible to
specify precise cleaning intervals for the product.
Environmental factors that may result in a need for
frequent cleaning include airborne dust and pollution.
Inspect products frequently to see whether cleaning is
necessary. If in doubt, consult your Martin
dealer about a suitable maintenance schedule.
To clean the product, use warm water and a soft
brush or a low-pressure or medium-pressure water jet.
Use car shampoo to help remove dirt and grease. If
possible, dry with a soft cloth to avoid streaking. Do not
use a stiff brush or scouring pad. Do not use solvents
or abrasives.
P3 PowerPort 1000 IP Rental - Revision A, 10-26-2017
martin.com.
Figure 25: Updating software
Figure 24: Read the user manual
by Harman
®
12 of 14
Advertisement
Table of Contents
