Introduction ..........1 Package Contents ..........1 System Requirements ..........1 Installation ..........2 Installing the RF1100 RFID Reader ......2 Installing the RF1100 Driver on a Laptop......3 How to Use the RFID UI Utility ......6 About the ISO Cards ..........8 Specifications..........9...
Congratulations on your purchase of our RF1100 RFID reader. This product is designed for use with any PDAs, handheld devices, or laptops with a PCMCIA or CF card interface slot. The RF1100 provides a high frequency transmission speed which allows communication between the contactless cards and a host, such as PDAs or laptops.
RF1100 User Guide Installation Installing the RF1100 RFID Reader The RF1100 RFID reader can be inserted into any CF slots or PCMCIA (via adapter) slots of any compatible PDAs or laptops. When using a PCMCIA slot, first install the RF1100 to the...
Follow the steps below to start the installation: 1. Make sure that the PDA synchronization software (Active- Sync suggested) is installed on your laptop. 2. Insert the RF1100 RFID reader into the CF or PCMCIA (via adapter) card slot of the laptop.
Page 6
RF1100 User Guide 3. The following window appears. Select Install from a list or specific location (Advanced), then click Next to con- tinue. 4. Select the directory where the driver is located. Click Next. 5. Click Continue Anyway when the following hardware...
Page 7
RF1100 User Guide 6. The installation process starts. 7. When the installation is complete, click Finish to close the wizard.
UID data to the RFID reader when they are in an applicable read range. To launch the RFID UI, do the following: 1. Insert the RF1100 RFID reader into the PDA or laptop CF or PCMCIA (via adapter) slot.
Page 9
RF1100 User Guide Updated driver will be released at any Note time without notice, please contact your local service centre. 3. There are three tabs at the top of the RFID UI screen: 15693, 1443A, and 1443B. Select the tab...
RF1100 User Guide 5. Place the ISO card within a distance of the RF1100 RFID reader (see maximum reading distance of each card in the section “About the ISO Cards”). Then click or tap Exe- cute on the screen to read the ISO card UID.
RF1100 User Guide Specifications Items HF RFID Reader Module Model No. RF1100 Windows 2000/XP/XP Embedded, Host Support Windows CE 5.0 Interface Type Compact Flash Type-1 Standard Support ISO14443A/ ISO14443B/ ISO15693 Reader Type Contactless Operating Frequency 13.56MHz DC Source 5V from CF Interface...
Need help?
Do you have a question about the RF1100 and is the answer not in the manual?
Questions and answers