FLUS IR-806 User Manual

User's Manual Mini Infrared Thermometer
1. Introduction
Congratulations on your purchase of our professional non-contact infrared thermometers.
These units can provide fast, easy and accurate temperature readings. With the non-contact (infrared) technology, they can
be used to measure the surface temperature of hard-to-reach objects like electrified equipment or moving objects without
any damage or pollution to them.
2. Features
● Fast and easy measurement
● The built-in laser pointer increases the target accuracy
● Max/Min record
● Automatic trigger off
● Automatic measurement range selection with resolution
3. Application
These units are widely used in Food preparation, Safety and Fire inspection, Plastic molding, Asphalt, Marine, Printing ink
and dryer temperature, Diesel and Fleet maintenance, etc.
4. Safety
● Use extreme caution when the laser beam is turned on.
● Do not point the beam toward anyone or any animals.
● Do not allow the beam to strike the eye from a reflective surface.
● Do not use the laser near explosive gases.
Safety Symbol
Comply with EMC
5. Field of View
The meter's field of view is 30:1, for example, if the meter is 30 inches
from the target spot, the diameter of the target must be at least 1 inch.
Other distance ratios are shown below in the field of view diagram.
● Precise non-contact measurement
● Adjustable emissivity: 0.1～1.0
● Backlight LCD display
● Auto power off
0.1℃/0.1℉﹤1000 1℃/1℉≥1000
6. Specifications
Range -50℃～650℃;-58℉～1202℉
Accuracy -50℃～0℃/-58℉～32℉：±4℃/9℉; Above 0℃/32℉:1.5% ±2℃/4℉
Optical Resolution D:S=30:1
Emissivity Adjustable: 0.10～1.0
Resolution 0.1℃/0.1℉﹤1000 1℃/1℉≥1000
Response Time ﹤250 ms
Spectral Response 8～14um
Operating Temp. 0℃ to 50℃ / 32℉ to 122℉
Storage Temp. -20℃ to 60℃ / -4℉ to 140℉
Relative Humidity Operating:10 to 95%RH Storage:＜80%RH
Auto Power Off Auto shuts off after 20Sec. of inactivity
Polarity Display Auto display, "-" indicates negative, while positive with no sign.
Diode Laser Output＜1mW，630～670nm, class 2(Ⅱ)
Power Supply 9V battery
Weight 171g
Dimensions(L*W*H) 155.5*98.8*27.5mm
7. Meter Description
A. Laser Pointer Beam B. IR Sensor
C. LCD Display D. ℃/℉ Switch Button
E. Laser pointer/Backlit Button F. MODE Button
G. Measurement Trigger H. Battery Compartment Cover
8. LCD Display Description
○ ○
1 Measurement Icon 2 Data Hold Icon
○ ○
3 Emissivity Icon 4 Backlit Icon
○ ○
5 Laser Icon 6 Low Battery Indication
○ ○
7 Temperature Unit (℃/ ℉) 8 Max/Min Record
○ ○
9 Measurement Reading 10 Max/Min Icon
-50℃～850℃;-58℉～1562℉ -50℃～1050℃;-58℉～1922℉