Troubleshooting - LG HR945T Owner's Manual

Blu-ray disc/dvd player with built-in hdd & hd tuner
Hide thumbs Also See for HR945T:
Table of Contents

Advertisement

16

Troubleshooting

Troubleshooting
Symptoms
The Power does not turn on.
The unit does not start
playback.
The angle cannot be changed.
Cannot play movie, photo or
audio files.
The remote control does not
work properly.
4
Cannot record or does not
record successfully.
Timer record does not record
successfully.
You cannot enter a timer
programme when.
If two or more timer programs
overlap.
Cause & Solution
y Plug the power cord into the wall outlet securely.
y Insert a playable disc. (Check the disc type, color system, and regional
code.)
y Insert the disc with the playback side down.
y Place the disc on the disc tray correctly inside the guide.
y Clean the disc.
y Cancel the Rating function or change the rating level.
y Multi-angles are not recorded on the DVD Video being played.
y The files are not recorded in a format that the unit can play.
y The unit does not support the codec of the movie file.
y The remote control is not pointed at the remote sensor of the unit.
y The remote control is too far from the unit.
y There is an obstacle in the path between the remote control and the
unit.
y The batteries in the remote control are exhausted.
y Check the remaining space on the HDD.
y If your source is copy-protected, you cannot record it using this
recorder.
y If you set a DTV rating for the recorder and higher rated digital
programs are received, the programme cannot be recorded. Change
the DTV rating level in order to record it.
y Clock is not set to correct time.
y The start time of the timer recording is past.
y When setting the recording programme, make sure you set the
recorder's built-in tuner, not the TV's built-in tuner.
y If the HDD is damaged, the recording may not complete successfully.
y If you set two timer recordings at the same time, one of that proceeds
after another does. Second Timer recording may proceed in a minute.
y In the case that two channels is recording.
y The time you're trying to set has already passed.
y There are already 32 timer programs set.
y The earlier programme takes priority.
y In the case a reserved recording is started during recording two
channels and a user uses another menu, the reserved recording
cannot be operated.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr949t

Table of Contents