1. Manuals
  2. Brands
  3. Revo Manuals
  4. Network Hardware
  5. RW4NVR1
  6. Product manual

Revo RW4NVR1 Product Manual

Wireless network video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Wireless NVR Kit Manual
REVO Wireless Network Video Recorder
Model # RW4NVR1
Product Manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RW4NVR1 and is the answer not in the manual?

Questions and answers

Related Manuals for Revo RW4NVR1

Summary of Contents for Revo RW4NVR1

  • Page 1 Wireless NVR Kit Manual REVO Wireless Network Video Recorder Model # RW4NVR1 Product Manual...

  • Page 2: Table Of Contents

    Wireless NVR Kit Manual Introduction 1.Product features overview ............................. 2 1.1Product introduction ............................2 1.2 Product parameters .............................2 1.3Functional features .............................. 3 2.Operating instructions ..............................4 2.1The front panel explanation..........................4 2.2Rear Panel Interface explanation ......................... 5 2.3The mouse operation instructions ........................5 2.4Input method instructions ............................
  • Page 3 Wireless NVR Kit Manual 4.1.5 Close the screen output ......................... 13 4.1.6 Turn off ..............................13 4.2Boot wizard ............................... 13 4.3 Video management ............................15 4.3.1 Search device ............................15 4.3.2 Add device ............................. 16 4.3.3 Advanced setup ............................. 17 4.3.4.Delete device ............................
  • Page 4 Wireless NVR Kit Manual 4.6.3 The motion detecting video ........................32 4.6.4 Alarm video ............................33 4.7 Video playback ..............................33 4.7.1 Quick playback ............................33 4.7.2 Regular playback ........................... 34 4.8Video backup ..............................35 4.9 Alarm ................................36 4.9.1Motion detecting alarm .......................... 36 4.9.2Video loss alarm .............................
  • Page 5 Wireless NVR Kit Manual 5.3.1 Cloud ID login ............................52 5.3.2 The user name login ..........................53 6.Mobile terminal access ..............................53 7. Appendix ..................................58 7.1Hard disk capacity unit conversion ........................58 7.2Video required capacity calculation ........................58...
  • Page 6 Wireless NVR Kit Manual Introduction Thank you for purchasing our products. If you have any questions or requests, please feel free to contact us. Statement   We have tried to ensure the integrity and accuracy of the contents of the manual. If it appears technically ...

  • Page 7: Product Features Overview

    1. Product features overview Product introduction The RW4NVR1 NVR is one of a REVO’s new generation of NVR (Network Video Recorder) products, which supports wireless WIFI network video access, supports maximum 1080P wireless real-time video preview, video encoding and playback operation. Using a number of high-tech, such as video and audio code technology, embedded system technology, storage technology, network technology, wireless network technology.

  • Page 8: Functional Features

    Wireless NVR Kit Manual Lens 4/6mm Date Time & Title White Balance Auto Day&Night IR cut filter with auto switch 3D-DNR Auto Mirror/Flip On / Off Dual-stream: smart stream 1920x1080@15fps 640x480@15fps Signal /noise rate > 39.1 Db Interface RJ45 / WIFI 802.11b/g/n Anti-thunder Level Standard IEC61000-4-5 Working Temperature/Humidi...

  • Page 9: The Front Panel Explanation

    Wireless NVR Kit Manual • Match with the IPC to support video motion detection; • Collaborate with IPC to support video masking; • Support user rights management; 2. Operation explanation The front panel explanation Figure 1 1．POW：Power indicator light 4．HDD：Hard disk indicator light...

  • Page 10: Rear Panel Interface Explanation

    Wireless NVR Kit Manual 2.2Rear Panel Interface explanation Figure 2 2.3Mouse operation instructions Mouse key Action effect Example Click 1, option button, drop down box, list box, check box, radio Select the target once button Click 1, switch between a single interface and the multi-interface Window zoom Left key twice...
  • Page 11 Wireless NVR Kit Manual 2.4 Input method instructions Figure 3 Name Key instructions Function instructions Number Input number 0~9 Enter the punctuation Character - / . _ * # @ Capital / lower caps Letter case switch case ← Backspace Remove the character before cursor...

  • Page 12: The Mouse Operation Instructions

    Wireless NVR Kit Manual 2.5The mouse operation instructions Figure 4 POWER Power button Device key：Press the DEV key, then press the number keys to enter the same device number with the host and press the "ENTER" key to save the settings. The control of the device will take effect.

  • Page 13: Interface Specification

    Wireless NVR Kit Manual dome camera to rotate to the right ENTER OK key. PLAY Video playback key Auxiliary key Recording key VIEW Multi-screen key Explanation  If there are multiple devices in the same place, the remote control first needs to select a device according to the device number, so each device should be defined a unique device number, otherwise the remote control operation may also take effect to multiple devices which have the same equipment number at the same time.

  • Page 14: Installation And Connection

    Wireless NVR Kit Manual Copy to Copy the settings of this channel to other or all channels. Menu explanation System setup：Regular setup, video setup, network setup, system management Right-click menu: screen selection, video playback, video backup, PTZ control, color adjustment, output volume, manual recording, system setups, setup wizard, camera add, system logout 3.
  • Page 15 Wireless NVR Kit Manual connect the NVR to the IPC with the cable. Right click on the mouse -> click on adding camera-> delete all channels (Note: if one or more channels, can click the channel(s) and click delete to delete the specified channel(s)) -> code matching ->...
  • Page 16 Wireless NVR Kit Manual 3.3 The camera placement 1，Place within the effective coverage range of the wireless signal, install wireless camera; 2，Power the wireless camera for 1 minute or so, you can see the video in the NVR monitor; 3，If it does not show the image, this may be indicating that the distance is too far or there is too much interference so you will need to shorten the distance.

  • Page 17: System Function Introduction

    Wireless NVR Kit Manual Figure 6 Figure 7 Place NVR and IPC antennas in parallel for best performance. If not the same height, IPC antenna should be tangent with the sphere of the NVR spherical center (Figure 6). Do not let the antenna point directly to NVR (Figure 7) 4.

  • Page 18: Login

    Wireless NVR Kit Manual 4.1.2 Login When the system is powered on and started, after waiting for the system to initialize, the system will automatically pop up the login interface. As shown below. The user needs to complete the login before proceeding. Steps：...

  • Page 19: Logout

    Wireless NVR Kit Manual 1，Using the left mouse button click the user name edit box, and enter the local login user name, the default factory settings for the user name is admin. 2，Using the left mouse button click the password edit box, and enter the local login password, the default factory settings password is empty, that means you do not need to fill it out.

  • Page 20: Boot Wizard

    Wireless NVR Kit Manual 4.1.6 Shut down If you need to shut down the system, you can right-click the shortcut menu, choose to exit the system. Click to close the system to complete. 4.2Boot wizard After the successful login, the system will automatically open the "Setup Wizard" interface, guide the user to set the basic settings, so that the device can work properly.
  • Page 21 Wireless NVR Kit Manual 3, Network settings. You can choose to automatically obtain IP address, manually set the IP address, gateway, mask, PPPoE and other operations. Operation interface as shown below, after the operation is complete, click the next step to continue the wizard setup, if you want to return to the third step, select the last step.
  • Page 22 Wireless NVR Kit Manual 4, Four：hard disk setup. Can display the current list of hard disk, including the model, capacity, usage, status, formatting status. If you want to format the hard disk, you can select the corresponding hard disk, then click the format button.

  • Page 23: Video Management

    Wireless NVR Kit Manual 4.3 Video management 4.3.1 Search for device Function instructions：Used to search all IPC devices in the same network segment. Steps：Right-click the system main interface, in the pop-up menu, click the "camera adding" sub-menu, select "video management", enter the video management interface, and click the "refresh" button to complete the search IPC device operation The figure looks like this: 4.3.2 Add device Function instructions：Used to add the searched IPC device.
  • Page 24 Wireless NVR Kit Manual first; (the IPC in the kit do not need this operation, when needing to connect the new IPC or after NVR ESSID and password modification will need this operation) 2. Code matching methods： First connect the wireless camera to any LAN port of the NVR with the network cable in the accessory box and the method to code matching interface is: main menu (right click the mouse) ->...

  • Page 25: Advanced Setup

    Wireless NVR Kit Manual are idle, using four cable connected to the four IPC, after fast adding, the monitor will display IPC video signal. Explanation Using fast adding function, the system will search all devices within the LAN and support automatic allocation of IP addresses.

  • Page 26: Delete Device

    Wireless NVR Kit Manual With the Intelligent Addition feature, when the system detects the IP address of the IP camera is abnormal (including IP conflicts or IPC is not in the same network segment as the NVR),it will allocate a new legal IP address to the IP camera. 4.3.4.
  • Page 27 Wireless NVR Kit Manual 4.3.5 Repeater setup Function description: Set up an IPC for long distance by connecting it to another IPC to send the video to the NVR thereby increasing the wireless transmission distance and extending the covering range of the wireless kit. Steps: 1, Right click on NVR’S GUI, left click “video management”→...
  • Page 28 Wireless NVR Kit Manual 3, As the picture shows below, it means IPC1 is connected to NVR through IPC2 and IPC3. IPC2 is connected to NVR through IPC3. IPC3 is connected to NVR directly. 4, Click “Apply” and then click “refresh” to check if the setup is successful.

  • Page 29: 6Edit Channel

    Wireless NVR Kit Manual 4.3.6. Edit Channel Functional explanation：Edit IPC device channel protocol, IP address, port, user name and password, stream type. Operational steps： 1, Right click on the main interface of the system, in the pop-up menu right-click "Video Management", in the open video management interface, click to select any of the IPC device which has been added;...

  • Page 30: 7Encoding Setup

    Wireless NVR Kit Manual 4.3.7. Encoding setup Functional explanation：Check information such as IPC device stream, resolution, bit rate, frame rate, one frame interval, H.264 coding level and so on. Operational steps： 1, Right click on the main interface of the system, in the pop-up menu right-click “Video Management". Enter the video management interface, click to select any of the IPC device which has been added;...
  • Page 31 Wireless NVR Kit Manual Explanation  Stream selection has the main stream, sub-stream optional. In the case of better network conditions, device self- adaptation choose the main stream, to get a more high-quality screen. In the case of poor network conditions, the device self-adaptation will select the secondary stream, to ensure the fluency of the monitor.
  • Page 32 Wireless NVR Kit Manual 4.3.9 Channel details Functional explanation：Check the device name, resolution, stream value, video frame rate, and software version of the IPC device in each channel. Steps: 1、Right click the main interface, in the shortcut menu, select the system setup and then select the channel setup -> channel details.

  • Page 33: Channel Osd

    Wireless NVR Kit Manual 2、Click Refresh, you can search the camera in current channel and you can check the channel name of the device, resolution, stream value, video frame rate, software version details. 4.3.10 Channel OSD Functional explanation：You can adjust the color of the IPC device in each channel and change the currently displayed channel name.

  • Page 34: Camera

    Wireless NVR Kit Manual 2, Select the color adjustment, enter the color adjustment interface. Can adjust chroma, brightness, saturation, contrast, and bright and soft. 3, Select the display setup, enter the location of communication icon adjustment. Can select position and magnification.

  • Page 35: Network Setup

    Wireless NVR Kit Manual 2, Select the corresponding channel, the installation mode can choose wall, hanging, desktop Explanation  The installation mode can be selected only when the panorama camera is connected  Currently can support the Panoramic cameras which support the N1 protocol 4.4 Network setup 4.4.1.
  • Page 36 Wireless NVR Kit Manual 2, Set the network parameters. In the network setup of the "network setup" modify the device's IP address, subnet mask, gateway and other information. You can check the automatic access to IP. Check the P2P and displays the ID for remote monitoring.
  • Page 37 Wireless NVR Kit Manual When this function is checked, the IP When using the DHCP function, you Automatically address of the device is set to be acquired cannot manually modify parameters get IP automatically. Otherwise, it will be set such as IP. manually.

  • Page 38: Ftp

    Wireless NVR Kit Manual Explanation The NVR currently supports 3322, changeip, no-ip, dyndns, oray. If the check box is unchecked, the dynamic domain name information will not be edited. 4.4.3. FTP Function explanation：For alarm and video test results uploading. Steps： 1, Right click the main interface, in the shortcut menu, select the system settings, and then select the network setup - >...
  • Page 39 Wireless NVR Kit Manual 1, Check the E-Mail function to open the check box. 2, Fill in the SMTP server, port, user name, sender, recipient and other information. 3, Click the "test" button. After the test successfully made, click "Apply" to save the setup. Detailed function list: Function name Function explanation...

  • Page 40: Pppoe

    Wireless NVR Kit Manual If the E-Mail function does not work properly, please make sure that the mailbox is enabled for the SMTP service and the e-mail account security settings allow usage with the recorder. 4.4.5. PPPoE Function explanation：Support dial-up Internet access. Steps：...

  • Page 41: Wireless Setup

    Wireless NVR Kit Manual 2, Check the 3G module to open the check box. 3, Fill in the dialing number, APN, PIN, user name and password and other information. 4, Click the "Apply" button to save the setup。 4.4.7. Wireless setup Steps：...

  • Page 42: Ptz Setup

    Wireless NVR Kit Manual Explanation Click Reset to restore the information of the wireless module to the factory setup. 4.5 PTZ setup 4.5.1 PTZ parameter setup Operation prerequisites： Before the user controls the IP channel or the PTZ, please make sure that the network between the PTZ decoder and the NVR is connected normally in advance and that the device PTZ decoder parameters are configured.

  • Page 43: Ptz Control Operation

    Wireless NVR Kit Manual The corresponding operation is explained below： Operation object Function Channel Select the target channel which need to be set. Protocol The selection must be consistent with the PTZ protocol. Device address Enter the address of the specified decoder. Baud rate Select the baud rate which matching the connected PTZ.

  • Page 44: Ptz Automatic Cruise Setup

    Wireless NVR Kit Manual Operation explanation： ：Control the PTZ upward movement. ：Control the PTZ downward movement. ：Control the PTZ move to the left. ：Control the PTZ move to the right. ：Control PTZ automatic circular motion + ：Adjust the zoom +, focal length +, aperture +. - ：Adjust the magnification -, the focal length -, the aperture -.

  • Page 45: Video

    Wireless NVR Kit Manual Explanation Preset position is the cruise point of the cruise patrol.  Hold time is the time the dome camera stays at this preset point.  Cruising speed is the rotating speed of the dome camera from one to another point. 4.6 Recording 4.6.1 Manual recording Functional explanation：With the manual recording function, the user can quickly turn the video on or off.

  • Page 46: Motion Detection Recording

    Wireless NVR Kit Manual 3, Use the drop-down box to select the channel and week which need to set the timed recording. 4, Set the time period for the scheduled recording, check the time check box. 5, If the other channels are the same as the channel recording schedule setup, click "Copy to" and check the other channels or all to copy the setup of the channel to other channels.

  • Page 47: Alarm Recording

    Wireless NVR Kit Manual  In the Channel Setup interface, select and click "Video Detection”.  Select the channel you want to set and sensitivity.  Detection Type Select "Motion".  Click the "Apply" button to save the setup. Explanation ...

  • Page 48: Video Playback

    Wireless NVR Kit Manual 4, After adding successfully, you can set the alarm continuity, video channels and video alarm mode. 5, Select the channel that needs to trigger the recording. 6, For the alarm recording plan configuration, refer to "4.6.2 Recording Plan Configuration Method of Timed Recording", and check the "Alarm"...

  • Page 49: Regular Playback

    Wireless NVR Kit Manual 4.7.2 Regular playback Function explanation：Open the regular playback function, the user can retrieve video data according to the record video type and time. Steps： 1, Right-click on the main interface and select Video Playback from the shortcut menu. 2, In the sub-menu, select the manual search, enter the "video playback"...

  • Page 50: Video Backup

    Wireless NVR Kit Manual  Support 2 times / 4 times / 8 times / 16 times the speed of playback. 4.8 Video backup Function explanation：Recording files can be backed up to USB flash disk for storage. Steps： 1, Insert the USB flash disk into the USB port of the device. 2, Right click the main interface, select "video backup"...

  • Page 51: Alarm

    Wireless NVR Kit Manual Explanation  After the search is complete, the user can see the start time, end time, duration and storage size of the video data.  To ensure successful video backup, make sure the USB flash disk has enough storage space. 4.9 Alarm 4.9.1Motion detection alarm Function description：When an object is detected in the selected screen, the device will trigger an alarm.

  • Page 52: 2Video Loss Alarm

    Wireless NVR Kit Manual 3, Select motion for the type of detection, check to turn on the check box. 4, Set the motion detection sensitivity. 5, Select the alarm duration, check the motion detection processing method, select the arming time and alarm area 6, Click the "Apply"...

  • Page 53: General Setup

    Wireless NVR Kit Manual 4, Set the alarm duration period, check the motion detection processing methods and arming time 5, Click the "Apply" button to save the setup. Explanation  If the other channel setup are the same as the channel, select the channel and click "Copy to". 4.10 General Setups 4.10.1General Setups Function explanation：Make setups for frequently used functions.

  • Page 54: Timeset

    Wireless NVR Kit Manual The operation is explained in the table below： Operational target Explanation Automatic logout Select whether the system is automatically logged off without operation. Button sound Select whether to turn on the button sound of the control panel. Language selection Select the language of the different countries as needed.

  • Page 55: Screen Setup

    Wireless NVR Kit Manual 4.10.3 Screen setup Function explanation：Set the screen parameters. Steps：Right click the main interface, select the system setup -> General Setup -> screen setup.

  • Page 56: 4Hard Disk Setup

    Wireless NVR Kit Manual The operation is explained in the table below： Operational target Explanation Monitor adjustment Set the hue, brightness, saturation, and contrast of the graphics OSD transparency You can modify the transparency of the interface. VGA Resolution Select the resolution that will adapt to the screen. Automatic cruise Whether to open the cruise and set the time Explanation...
  • Page 57 Wireless NVR Kit Manual 1, Right click the main interface, select and click "system setup", enter the "system setup interface". 2, Select General Setup -> Hard Drive Setup. As shown below： 3, You can see all the information the device connected to the hard disk, including model, capacity, status, formatting status.
  • Page 58 Wireless NVR Kit Manual 4.10.5 Exception setup Function description: You can set the alarm mode for the system's exception type Steps: 1, Right click the main interface, select and click "system setup", enter the "system setup interface". 2, Select the General Setup -> hard disk setup. As shown below: 3, Select the exception type, click "Open", and select the alarm mode.
  • Page 59 Wireless NVR Kit Manual Steps： Right click the main interface, select the system setup in the shortcut menu, and then select the system management - > version information. As shown below： Explanation  Version information for our late maintenance has a very important significance, the user needs to provide the appropriate version information when in need of maintenance.
  • Page 60 Wireless NVR Kit Manual Log information： Function explanation：The user can check the corresponding log information according to the time type, start time and end time. As shown below：...

  • Page 61: User Management

    Wireless NVR Kit Manual Steps： 7, Right click the main interface, elect the system setup in the shortcut menu, and then select the system management -> log information. 8, Select the time type in the drop-down menu. 9, Set the start time and end time, click the "search" button, you can view the corresponding log information. Explanation ...
  • Page 62 Wireless NVR Kit Manual Add the user Steps： 1, Right click the main interface, in the shortcut menu, select the system setup, and then select the system management -> user management. 2, Click the "New User" button to enter the "New User" interface. As shown below：...
  • Page 63 Wireless NVR Kit Manual 3, Enter the new user name and password. 4, Select the authority the user has, the super user default has all the permissions. 5, Click the OK button to see the newly added user in the user list. Permission explanation：...
  • Page 64 Wireless NVR Kit Manual 3, In the delete prompt box, click "OK". You can see the user is deleted in the user list. Explanation  Super users cannot be deleted. Edit user Steps： 1, Right click the main interface, in the shortcut menu, select the system setup, and then select the system management ->...
  • Page 65 Wireless NVR Kit Manual 3, Re-edit the user's permissions. 4, Click the "OK" button to save the settings. Explanation  Super users cannot be edited. Change Password Steps： 1, Right click the main interface, in the shortcut menu, select the system setup, and then select the system management ->...

  • Page 66: System Maintenance

    Wireless NVR Kit Manual  Super user factory default password is empty.  The current login non-super user, can only modify the current user password, cannot create, delete, edit the user. 4.11.3 Restore to the factory setting Steps： 1, Right click the main interface, in the shortcut menu, select the system setup, and then select the system management ->...

  • Page 67: Software Upgrade

    Wireless NVR Kit Manual 4, Click OK. 4.11.5 Software upgrade Function explanation：Software upgrades are used for user firmware upgrades. Steps： Method one： 1, Right click the main interface, in the shortcut menu, select the system setup, and then select the system management ->...

  • Page 68: Ipc Maintenance

    Wireless NVR Kit Manual you can see the progress of the system upgrade, wait for the system upgrade to complete, the device will restart. Explanation  Before using USB flash disk connect to the USB port to do the system upgrade, please ensure that the upgrade file placed in the root directory of the U disk.

  • Page 69: 5Web Access

    Wireless NVR Kit Manual selection. Click to start. 3, In the progress bar you can see the progress of the system upgrading, wait until the upgrade is complete, the camera will then restart. Explanation  IPC upgrade only for specific protocol IPC, if you cannot search for upgrades, it means this camera does not support this feature.
  • Page 70 Wireless NVR Kit Manual 3, Enter the user name and password correctly. 4, Click "Login" to enter the preview interface. As shown below： 5, The first time you follow the prompts to download and run the WebClient.exe control. As shown below： 6, Log in again to preview the interface normally.

  • Page 71: Preview

    Wireless NVR Kit Manual Explanation  IP address can be checked in the system setup -> network setup.  Support multiple users log in at different PC terminals.  If the web page port number is modified (default is 80), when input IP address in the browser, you need to enter the port number after the address, such as 192.168.1.28:102.

  • Page 72: Playback

    Wireless NVR Kit Manual Channel list PTZ controls Configuration Sound on / off Explanation  Screen segmentation support 1,4,9,16,25,36 screen segmentation.  Support the main stream, sub-stream selection. 5.2.3 Playback Specific steps： 1, Click the playback icon in the preview interface. 2, Enter the playback interface, as shown below：...

  • Page 73: Configuration

    Wireless NVR Kit Manual 3, Set the search time and type, channel, click the "Search" button. 4, Select the playback channel to play back the recording data normally. Explanation  When a non-super user logs in, please make sure that the user has remote playback permission. You can check and give users a remote video playback permission in the System Setup ->...

  • Page 74: Cloud Id Login

    Wireless NVR Kit Manual  For the specific configuration functions, please refer to the system function introduction in this text.  When a non-super user logs in, please make sure that the user has remote configuration rights. You can view and assign the user to remote configuration rights in System Management ->...
  • Page 75 3, The first time, you can register according to the prompt information, after registration and then log in. Explanation  Support Chinese and English language selection. 6. Mobile access Steps： 1,App download. Open the phone’s app store and search “REVO Wireless”, download and install the app. 2, After opening the software, as shown below：...
  • Page 76 Wireless NVR Kit Manual Notice： ● The first time the installation is completed, the login page will pop up. If there is no login account, you may register an account. After the account login, every time you open the software, it will direct you into the device interface.
  • Page 77 Wireless NVR Kit Manual choose to experience, the added device information cannot display in other mobile phone. 3, Add device. Click the top right corner “+”, select the cloud ID, fill in the NVR connection information. As shown below： Explanation ●...
  • Page 78 Wireless NVR Kit Manual Description ● Up to 16 channels can be previewed at the same time ● support 4/6/8/9/13/16 screen split to preview at the same time ● If the PTZ control is supported, can use the PTZ control button to operate. 5, Remote playback.
  • Page 79 Wireless NVR Kit Manual Explanation ● Remote playback can pull the vertical bar to select a specific period of time, click the channel to select a specific channel. ● Support 1 channel playback. ● If the video has sound, the playback will also have sound. ●...
  • Page 80 Wireless NVR Kit Manual Explanation  Click the screenshot to intercept the current screen  Click and select video to save the video in your phone  Click on the picture quality, can choose HD or SD, HD is the main stream, SD is sub-stream. 7, Mobile phone APP alarm.
  • Page 81 Wireless NVR Kit Manual...

  • Page 82: Appendix

    Wireless NVR Kit Manual Explanation  Need to use the account login, not using account login cannot set off the alarm  Before adding a device, you need to set the alarm function in the app. A detailed reference, PLS refer to 4.9.1 motion detection alarm, otherwise you cannot receive alarm information or even open the alarm setting.

Table of Contents