Transmission / Receiving Protocol - LG M2280D Owner's Manual

46
EXTERNAL CONTROL DEVICE SETUP (Only applied to B2B model used in a place like a hotel)

Transmission / Receiving protocol

Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[ Command 1 ] : First command to control the TV.(j, k, m or x)
[ Command 2 ] : Second command to control the TV.
[ Set ID ] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range
is 1 to 99. When selecting Set ID '0' , every connected the TV is controlled. Set ID is indicated
as decimal (1 to 99) on menu and as Hexa decimal (0x0 to 0x63) on transmission /receiving
protocol.
[ DATA ] : To transmit the command data. Transmit the 'FF' data to read status of command.
[ Cr ] : Carriage Return ASCII code '0x0D'
[ ] : ASCII code 'space (0x20)'
* In this model, TV will not send the status during the standby mode.
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
* In this model, TV will not send the status during the standby mode.
* Data Format
[ Command 2 ] : Use as command.
[ Set ID ] : Use the small character, if set ID is 10, it will send the '0' , 'a' .
[ DATA ] : Use the small character, if data is 0 x ab, it will send the 'a' , 'b' .
[ OK ] : Use the large character.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-
viable functions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, TV will not send the status during the standby mode.
* Data Format
[ Command 2 ] : Use as command.
[ Set ID ] : Use the small character, if set ID is 10, it will send the '0' , 'a' .
[ DATA ] : Use the small character, if data is 0 x ab, it will send the 'a' , 'b' .
[ NG ] : Use the large character