KT KMR200 User Manual

KMR2 00
User Guide
Ver 1.0

3. Name of Each Part

Front
LCD Display Power Saving Button Power On Button(OK)
1 2 4
(Next)
Charging Status LED
3
Side
Name Function
① LCD Display Display of operational status and functional menu
Press & Hold (for over 3 sec): entering/releasing power saving mode
Short Press: Menu selection (Next)
② Power Saving Button (Next)
③ Charging Status LED LED for displaying charging status (Charge in progress: Red / Charge completed: Green)
Press & Hold (for over 3 sec): Power On/Off
④ Power On Button(OK) Short Press: Menu selection (OK)
USB port for external battery function (charging other devices)
⑤ USB port (External Battery output)
Short Press: Restart
⑥ nitialization Button
Press & Hold (for over 10 sec): Initialization
⑦ Nano USIM Slot Slot for USIM installation
⑧ Micro USB port USB port for either charging main body or data communication
⑨ USIM Cover Product Protection (product label, Initialization button, Nano USIM slot)

6. Procedures for Charging

● Charging with a charger
-Connect USB cable to a charger
-Connect the micro connector of USB cable
to the micro connector of a main body
of KMR200
-Connect a charger to AC power outlet
Power outlet
Mcro USB
port
Charger
Charging Status LED lights on Red and turns to
Green after fully charged
Charging status of battery can be checked
through LCD display during charging
This user guide describes the methods for using this product.
Please read this user guide carefully for correct use before using this device.
This product is a portable wireless port sharing device that offers wireless internet
service connection to a variety of terminals by altering LTE or WiBro signals into WiFi or
USB. In addition, this product allows users to enjoy in various ways in a car or indoors
by connecting an USB cable supplied as an accessory and users can use this product
simply and conveniently through its dedicated App (my URoad).
● This product requires separate circuit contract with a specified service provider, KT.
● The pictures and images in this user guide may be different from real product.
● The software version of this product can vary depending on the conditions of the service provider,
and can be changed without a notice.

1. Major Functions

This product offers various specialized functions other than wireless internet functions
so that users can use. Please smartly use this product by utilizing those functions.
Use in various environments with USB cable
This product can be connected to the battery charger in a car, adapters or PCs /Mac via USB cable.
External battery power function
This product can charge other devices using USB cable.
Loss Prevention
When a Smart Phone or a tablet is away certain distance from this product(egg), or location of
this product(egg) is unknown, the mobile App (my URoad) in Smart Devices informs the location of
egg or alarms user for distance away of egg so that a loss of egg can be prevented.
Rear
USB port (external battery output)
5
MSIP-CRM-MDJ-KMR200
Nano Micro USB port
7 8
USIM Slot
(for charging main body)
Side
Initialization Button
6
USIM Cover
9
● Charging with USB cable
(via PC connection)
-Connect USB cable to USB port in PC
-Micro connector of USB cable to the micro
connector of a main body of KMR200
Mcro USB
USB
port
port
When charging the product, please make sure
to use specified charger and USB cable.
Unauthorized chargers or USB cables may
cause a failure of product.
PC connection via USB cable for charging
the product requires more time than using
AC power with a charger.

4. LCD Status Display

d WiFi Frequency
c No of WiFi connections
e Easy Share
a LTE signal strength
b Message Display
Window
Name Expression Function
LTE signal strength (very strong)
f. Bluetooth
LTE signal strength (strong)
a. LTE signal LTE signal strength (moderate)
strength
LTE signal strength (relative weak) g. USB Tethering
LTE signal strength (weak)
LTE signal strength (no signal)
b. Message Display of Terminal status,
Display Window Current time, Functional Menu
h.Battery Remains
c. No of WiFi Display of the number of
connections
WiFi connections
In use of 2.4GHz WiFi Frequency
d.WiFi Frequency
In use of 5GHz WiFi Frequency
Easy Share (Guest WiFi) in operation
e. Easy Share
i.Data Usage
OFF Easy Share (Guest WiFi) Off
7. Power On/Off and Entering/Releasing Sleep Mode 8. WiFi Connection
Power Saving / Next Button
●Press & Hold: Entering/Releasing Power Saving Mode
● Press: Move to next menu
●Power On
-Pressing & holding [Power(OK)] button for more than 3 sec displays
on LCD screen.
-After LCD On, it takes approximately 20~30 seconds to complete a booting.
●Power Off
-Pressing & holding [Power(OK)] button at the side of product for more than
3 seconds results in Off state of LCD in the product.
-Power goes Off right after LCD Off.
●Entering Power Saving Mode
-To enter Power Saving Mode, press & hold [Power Saving(Next)]
button for 3 seconds causes LCD Off.
-Power Saving Mode display automatically goes off after 20-40 seconds.
●Releasing Power Saving Mode
-Pressing & holding [Power Saving(Next)] button for 3 seconds in Power Saving Mode
results in LCD On.
-Power Saving Mode is released after LCD On.
In Power Saving Mode, pressing either [Power Saving(Next)] button or [Power(OK)] button can check the status.
It is very convenient to use the product, since a "reserved power saving" function in my URoad
[mobile App] or Web setting screen allows to enter or release Power Saving Mode automatically
as predetermined settings.

2. Accessories included

Main Body
Ver 1.0
FAQ
KMR200
Frequently Asked Questions
Warranty
Ver 1.0
User Guide FAQ
(Frequently Asked Questions)/
Warranty
The accessories can be changed without notice due to performance enhancement or other reasons.
Using other accessories except the supplied items may cause failure in product,
Memo
please use the supplied items.
f Bluetooth (loss prevention)
g USB Tethering
h Battery Remains
Data
i Data Usage
Name Function
Expression
Loss Prevention Function in
operation
(loss prevention)
Loss Prevention Function Off
OFF
USB Tethering Function On
USB Tethering Function Off
OFF
Battery Remains (100~80%)
Battery Remains (79~60%)
Battery Remains (59~40%)
Battery Remains (39~20%)
Battery Remains (19~1%)
Battery Remains (below 1%)
Battery Charging in Progress (5 levels)
Battery Charging completed
Data Usage Display (GB)
Data
Data Data Usage Display (MB)
Power / OK Button
● Press & Hold: Power On/Off
● Press: Menu Selection
Press and hold the
[Power (OK)] button
for about 3 seconds
Press and hold the
[Power Saving(Next)]
button for about
3 seconds
Pouch
USB Charger USB cable
cable strap
5. Procedures to
Insert USIM card
1.
Open the USIM cover located at the side.
2.
Place the metal face of
USIM up and push the
USIM insert into a slot
YYMMDD
until hearing clicking
1234567
123456789012345
sound.
ktEgg_123
moda12345
3.
Close the USIM cover.
Please be careful not to damage on the metal
area of USIM when inserting or releasing.
Inserting a USIM card with wet hands
may cause a damage in USIM.
●Window 7
-Select [Start▶Control Panel▶Network & Sharing Center]
-Select [Network Connection]
-Select the [ktEgg_xxx] among WiFi names shown in [Wireless
Network Connection] and then click [Connect] Button.
※ "xxx" refers to the terminal number or the
unique number of English characters .
- Open the USIM cover in main body and copy 'KEY'
(WiFi Password) value on the attached label, then input the
value to a window "Network Security Key Input".
YYMMDD
1234567
123456789012345
ktEgg_123
moda12345
- Later on, after connection is completed, execute the
Web browser to verify the internet connection.