Table of Contents
Advertisement
Boat Trailer Winch: 2 speed - 5:1/1:1
F10206, F10207, F10217, F10218
Contents:
Specifications and Features
Front and Side Elevation, Bolt Down Specifications
Advansa Pty Ltd 258 Halifax Street, Adelaide SA 5000
advansa
(T) +61 (0)8 8243 9100 (F) +61 (0)8 8243 9185
Owner's Manual
ratio model (700kg)
1
2
2
3
3
4
rope / webbing
Warranty
Rolling Capacity
4
5
5
6
6
6
6
8
9
Advertisement
Table of Contents
Summary of Contents for Jarrett F10206
-
Page 1: Table Of Contents
Owner’s Manual Boat Trailer Winch: 2 speed – 5:1/1:1 ratio model (700kg) F10206, F10207, F10217, F10218 Contents: Specifications and Features Spare Parts Listing Front and Side Elevation, Bolt Down Specifications Safety Information General Theory of Operation Installing the Winch Installing wire cable / fibre... - Page 2 2 Speed Boat Trailer Winch Owner’s Manual Boat Trailer Winch 2 speed 5:1 / 1:1 ratio model (700kg) Model: No Cover Cover Webbing F10206 F10206WC Fibre Rope F10207 Winch only F10218 Cable (Ø5mm) F10217 Gear Ratio 5:1 / 1:1 Application Pulling Rated Capacity (using Ø5mm Cable)
-
Page 3: Spare Parts Listing
2 Speed Boat Trailer Winch Owner’s Manual 2 speed 5:1 / 1:1 ratio model Boat Trailer Winches - Spare parts listing - F10206, F10207, F10217, F10218 Front and side elevation, and bolt-down specifications / dimensions Winches are not intended (1) for the movement of people and (2) as a load securing device for boats on trailers... -
Page 4: General Theory Of Operation
2 Speed Boat Trailer Winch Owner’s Manual Important Safety Information DO the following: Read carefully and comply with the guidelines set forth in the Owner’s Manual. Keep hands away from the drum, gears, wire cable, and other moving parts of the equipment. Keep all unnecessary personnel away from the winch while in operation. -
Page 5: Installing The Winch
Fasten the winch securely to the boat trailer, utilising all four mounting holes to ensure maximum capacity. 4ea. M10 galvanised or G316 stainless steel bolts, flat and spring washers and nuts should be used to secure the winch to the boat trailer. Installing wire cable / fibre rope / webbing onto Jarrett winches Important ! Use wire cable and other rigging equipment rated for the capacity of the winch. -
Page 6: Preparing For Operation
- be careful not to burr over the shaft corner/edge or damage the bushing remove old webbing ensure loop of new "Jarrett" brand webbing is flexible/loose locate webbing 'loop' into slot of the winch drum and secure with shaft (which goes through the loop) -
Page 7: Moving The Load
2 Speed Boat Trailer Winch Owner’s Manual Moving the Boat Important ! Obey a stop signal from anyone. • Maintain tension on the wire cable to keep it tightly and evenly wound on the drum. • If the winch and boat are not visible during the entire operation, get help from another person. •... - Page 8 2 Speed Boat Trailer Winch Owner’s Manual Visually inspect the entire winch and all other associated equipment involved in the operation. Check all equipment for cracks, dents, bending, rust, wear, corrosion and other damage. • Check gears, pinions and pawl for wear, and other damage. •...
- Page 9 Advansa Pty Ltd Winch Warranty Policy: The Warranty is for the period of twelve months on Jarrett winches / cranes providing it is used for the purpose that it was designed for. Any modifications or misuse of the winches / cranes will void the warranty.
- Page 10 2 Speed Boat Trailer Winch Owner’s Manual Rolling Load Capacity of a Winch Max. rated Rolling Load Capacity Multiply incline % incline Degrees winch capacity by To calculate the rolling load capacity of a winch - the amount of load that can be pulled up an incline - multiply the winch capacity by the factor shown in the chart below.