Smart
Socket
Quick Start Guide
Model No. L42WH
Before you start
You will need
A back-box with a minimum depth of 35mm
Suitable electrical screwdrivers
Knowledge of how to safely turn off/on
mains electricity
Your Link Plus, smartphone and socket
Hints and tips
Get the best out of your install
www.lightwaverf.com
Let's get started
Installing yourself?
Please note that all Lightwave products can be legally
DIY installed in your own home; however, if in doubt,
always consult a qualified electrician.
It is important to install this product in accordance with
these instructions. Failure to do so may risk personal safety,
could create a fire hazard and will also void your warranty.
If conducting an insulation resistance test, any hard-wired
Lightwave devices must be disconnected from the mains,
or damage to the unit may occur.
Help video & further guidance
For additional guidance, and to watch a video that will help
guide you through the installation process, please visit the
support section on www.lightwaverf.com
Back box and spacers
This Lightwave Smart Socket requires a 35mm deep back box
in which to mount it. If you have a back box that is shallower
than 35mm, then a Lightwave spacer can be used to provide
up to 10mm of extra clearance from the wall.
Range
Lightwave Sockets should have an excellent communication
range within a typical home, however, if you encounter any
range issues, try to ensure that large metal objects or bodies
of water (e.g. radiator) are not positioned in front of the
socket or in between socket and the Lightwave Link Plus.
Environmentally
friendly disposal
Old electrical appliances must
not be disposed of together with
residual waste, but have to be
disposed of separately. The disposal
at the communal collecting point
via private persons is for free.
The owner of old appliances is
responsible to bring the appliances
to these collecting points or to
similar collection points. With this
little personal effort, you contribute
to recycle valuable raw materials and
the treatment of toxic substances.
In the box
Specification
RF frequency:
868 MHz
Input rating:
230V~ 50Hz.
Output rating:
3,000W max
L42 Socket
Back Box Depth:
35mm min
Standby Energy Use:
Less than 1W (per gang)
Warranty:
2 year standard warranty
Socket spacer
x2 Fixing screws
Locking sockets
Lightwave Smart Sockets can be locked from the Lightwave
App so that they cannot be operated manually. This is a great
way help with family safety by ensuring that dangerous
appliances cannot be turned on or off by small children.
Automations
Using the Link Plus and Lightwave App, you can create
custom automations for Lightwave devices. Automations
provide a whole host of clever features, including timers,
group actions, triggers and wireless 2-way switching. Find out
more by exploring the Lightwave App.
EU Declaration of Conformity
Product: Dual Mains Socket
Conformity is shown by
Model/Type: L42
compliance with the applicable
Manufacturer: LightwaveRF
requirements of the following
documents:
Address: Innovation Campus
Birmingham, Faraday Wharf,
Reference and date:
Holt Street, Birmingham, B7 4BB
EN301489-3 V1.6.1: (EMC),
EN300220-2 V3.1.1 (RF),
This declaration is issued under
EN62479:2010 (RF Exposure),
the sole responsibility of the
EN60669-2-5:2013 (Safety),
LighwaveRF. The object of the
BS1363-2:1995 (UK Safety)
declaration described above is in
conformity with the relevant union
Signed for and on behalf of:
harmonisation legislation.
Place of Issue: Birmingham
Date of Issue: 20th August 2017
Directive 2011/65/EU ROHS,
Name: John Shermer
Directive 2014/53/EU: (The Radio
Position: CTO
Equipment Directive)
Need help?
Do you have a question about the L42 and is the answer not in the manual?
Questions and answers