Page 1
Receiver Unit: 1. Remove knocker ring. Motion Sensor 1. Connector 2. LED Indicator Motion Sensor Unit: Motion Detector MAS200 Motion User Manual Sensor CR2450 2. Open the front cover. 1. Door Knocker Casing 2. Motion Sensor Unit (Inside knocker casing) 3.
Page 2
& your body. This transmitter must not be co-located or operating in conjunction with any other 4. Restart the camera. The selected sensor will be di er from actual products. Please refer to Brinno o cial site for 2. Run motion sensor test and make sure the antenna or transmitter.