Acewell ACE-2956 series User Manual

ACE-2956 series User's Manual
1.
2.
3.
4.
8.
ACE-2956
5.
6.
Thank for purchasing an Acewell ATV/Motorcycle/Scooter computer. This
manual is specially designed for the ACE-2956xx series. Each model has 4-6
LED indicators. Different models have different LED indicators; a fuel meter is
optional, but all other functions are the same. You may find that the photo above
has a set of LED indicators different from your computer; the photo is for
reference only.
PANEL DESCRIPTIONS
1. Bar Speed Scale
2. Bar Speed
3. 1st row display: Speedometer,
Maximum Speed
4. 2nd row display: Other functions .
Left-Direction Indicator/Green
Main-Beam Headlamp/Blue
Right-Direction Indicator/Green
Hazard Warning/ Red
Parking/Green
P
Direction Indicator/Green
Trailer Flashers/Green
FEATURES
Includes analog and digital tachometer, speedometer
(300km/h), trip meter, odometer, clock, average
speedometer, maximum speedometer, riding timer and
cumulative riding timer.
Computer unit has 4-6 built-in LEDs for different
purpose indicators.
LCD has two rows of digital and one analog
bar-graphic tachometer displays, with blue LED
backlight.
Odometer and cumulative riding timer measurements
are stored in memory, even when power is off.
The computer's clock is always on, even when other
functions are power-off.
Universal wheel circumference setting range of
1-3999mm.
Metric/ British system options.
SPECIFICATIONS
SPECIFICATIONS
FUNCTIONS Symbol
Bar Tachometer 500-12,000 rpm
RPM
Digital Tachometer 100-19,900rpm
RPM
Shift Warning
100-19,900rpm
MAX
Maximum Tachometer 100-19,900rpm
RPM
Speed Meter
2.3-300KM/h (187.5M/h)
Maximum Speed Meter MAX
MAX 2.3-300KM/h (187.5M/h)
AVG
Average Speed Meter
AVG 2.3-300KM/h (187.5M/h)
Trip Meter
TRIP 1&2
0.0-999.9 Km (624.9 Miles)
ODO
Odometer
0 - 999999 Km (0.0- 624999 Miles)
RT
Riding Time 0.00'00"- 99:59'59"
TT
Total Time
9999H59'
Clock
0.00'00"- 24:59'59"
Temperature
℃ ℉
/
0℃-180℃/ 32
Power Input: 12VDC.
Speed Sensor: No Contact Magnetic Sensor.
Tachometer Input: CDI or Ignition-coil signal.
Wheel Circumference Setting: 1mm - 3999 mm (1 mm increment)
Operation Temperature: -10°C - +80°C (inner housing)
Storage Temperature: -25°C - +85°C (inner housing)
INSTALLATIONS & PARTS
ATV Computer
www.acewell-meter.com
E
13 10R-022811
H
7.
C
5. RESET Button
6. MODE Button
7. Temp Bar: (optional)
8. LED indicator symbols
Engine Oil/Red
Neutral Gear/Green
N
R Reverse Gear/Red
D
Drive Gear/Green
Engine Coolant Temperature/Red
Rear Fog Lamp/Amber
Engine "Not In Use"/ Red
ACCURACY
INCREMENTS
500 rpm
100 rpm
100 rpm
100 rpm
+/-1% or
0.1 KM/H or M/H
+/- 0.1(KPH/MPH)
+/-1% or
0.1 KM/H or M/H
+/- 0.1(KPH/MPH)
+/-1% or
0.1 KM/H or M/H
+/- 0.1(KPH/MPH)
+/- 0.1%
0.1 Km or Miles
+/- 0.1%
1 Km or Miles
+/- 50PPM
1 Second
+/- 50PPM
1 Minute
1 Second/1 Minute +/- 50PPM
℉
℉ ℉
- 356 1℃/ ± 1℃/
Main Unit Mounting
Rubber Pad
Spring Washer
Fixing Screw Nut
1. Signal intensity from ignition coli is dependent on vehicle type.
2. Circles 2-5 turns around ignition coil, with more turns creating steadily
signal, fewer turns creating weaker signal.
3. The computer can use all type of ignition system, only if the RPM is not
stable you must sometimes add the attached 1MOhm resistor in the wire of
the RPM input.
BAR RPM: Bar Graphic Tachometer
1. The bar graphic tachometer reading is always displayed at the bar graph.
2. Tachometer bar graphic displays up to 12,000 RPM.
RPM: Digital Tachometer
1. RPM is displayed in 2nd row.
2. Digital tachometer displays up to 19,900 RPM.
3. Tachometer signal picked up from either CDI or Ignition coil.
Shift Warning RPM
1. Function enables you to set up an RPM shift warning.
2. Bar-graphic tachometer flashes when RPM reaches pre-set value, and stops
flashing after you shift gear.
MAX RPM: Maximum Tachometer
1. MAX RPM is displayed on 2nd row.
2. Displays highest tachometer reading achieved after last RESET operation.
SPD: Speed Meter
1. Speed meter display is on 1st row of the screen.
2. Displays speedometer reading up to 300.0 Km/H or 187.5 mph.
MAX: Maximum Speed Meter
1. MAX is displayed on 1st row.
2. Displays highest speed achieved after last RESET operation.
AVG: Average Speed Meter
1. AVG is displayed on 2nd row.
2. Calculates average speed from last RESET.
TRIP 1 & 2: Trip Meter 1& 2
1. TRIP function registers cumulative trip distance from last RESET while bike is
being ridden.
2. Display is on 2nd row of screen.
ODO: Odometer
1. ODO registers cumulative distance traveled during motorbike operation.
2. ODO data is stored in memory, even when power is off.
RT: Riding Timer
1. Calculates total operation time from last RESET.
2. Count automatically begins with vehicle movement.
TT: Total Riding Timer
1. Calculates total operation time from the beginning of bike use.
2. Count automatically begins with vehicle movement.
3. TT data is stored in memory, even when power is off.
12/24 hour Clock
It displays 12- or 24-hour current time.
Fuel Meter (Only for models with the function)
℉
1. Has 7 bargraphic indicator of fuel status.
2. Last bar flashes to indicate low fuel level.
Temperature Meters
℃ or �F:
1. It displays -L-℃ or -L- �F when temperature is lower than 0℃ or 32 �F , and
displays-H- ℃ or -H- �F
2. The LCD screen will automatic change to temperature screen and flashes the
digits of temperature when the thermo sensor detects temperature over the
presetting warning temperature; The MODE key is out of function until the
temperature cooling down and lower than the presetting waring temperature.
Max8mm
sensor
Vibration Direction
Speed Sensor & Magnet Mounting
Attention：
1.Align the center of the magnet to
either the sensor marking line
or the end of the sensor.
2.Installing the sensor parallel to
the vibration direction creating
optimal anti-vibration effect.
3.Be sure the gap between the magnet
Washer
and the sensor is within 8mm.
RPM Sensor Mounting
CDI
Ignition Coil
FUNCTIONS
when temperature is over 180℃ or 356�F
Max8mm
sensor
Vibration Direction
RPM-INPUT
Either One
2-5 Turns
.