Summary of Contents for Atus LBB6152/01
- Page 1 Installation manual Single storage rack II_LBB615201_en_1817 ► LBB6152/01 Single storage rack, for Paging receivers and PS-micro Mobiles...
-
Page 2: Table Of Contents
en | 2 Personal Security | Installation Manual Table of contents About this manual ..............................3 Function ................................... 3 Digital version ................................3 Disclaimer ................................3 Illustrations ................................3 Important Safeguards ..............................4 Precautions and notes ............................. 4 Signs ..................................4 Introduction ................................ -
Page 3: About This Manual
1.3 Disclaimer Atus is a brand name of International Pagerservices B.V. (IPS). IPS reserves the right to change data and/or specification of any equipment or software mentioned in this publication without prior notice. Although every effort is made to ensure that the information in this publication is accurate and correct, IPS is not responsible for damage arising from its misuse. -
Page 4: Important Safeguards
| 4 Important Safeguards Proper service and repair is important for safe and reliable operation of all Atus equipment. Some service operations require the use of tools specially designed for the purpose. These special tools should be used when recommended. To minimize risk of personal injury and damage to the product only trained service personnel with awareness of hazards of electronically equipment must be allowed to service this product. -
Page 5: Introduction
The single storage rack is default delivered without PSU. ► The LBB6152/01 is compatible with its predecessor (the LBB6152/00) and can be used in combination with all Atus PS6000 and DP6000 personal security and paging systems. Depending on the setting of an internal switch a Pager will bleep nor not bleep when placed in the single storage rack. -
Page 6: Functional
Personal Security | Installation Manual en | 6 Functional When the Paging Receiver/PS-Micro mobile is placed in the rack, its batteries will be charged (if the switch in the battery compartment in the receiver/PS-micro mobile is set in the right position). 4.1 Bleep while in rack NO BLEEP Special for pagers a switch is built in the storage rack to decide if you want to... -
Page 7: Recharging A Paging Receiver/Ps-Micro Mobile
Personal Security | Installation Manual en | 7 Recharging a paging receiver/PS-Micro mobile To recharge the batteries of a paging receiver/PS-Micro mobile, simply place it in the recharging bay of the storage rack. It will fit one way only. When the mobile is correctly seated, the indicator LED will illuminate clear. -
Page 8: Service
Personal Security | Installation Manual en | 8 Service 8.1 Service / repair policy There are no spare parts made available, therefore there is no spare parts includes in this manual. 8.2 Repair policy All kinds of repairs are to be carried out through the repair channel at IPS B.V. Note: All In warranty repairs are handled according to the carry-in service level. -
Page 9: International Pagerservices B.v. | Ii_Lbb615201_En
International Pagerservices B.V. Willem de Haastraat 5 5421 TN Gemert The Netherlands http://www.atusbv.com https://pagerservices.nl © 2018 International Pagerservices B.V. - All rights reserved Data subject to change without notice II_LBB615201_En_1817...
Need help?
Do you have a question about the LBB6152/01 and is the answer not in the manual?
Questions and answers