Summary of Contents for SpaceLas PT-40K
-
Page 1: User Manual
Scanner Set USER MANUAL MODEL:PT-40K please read this manual carefully before your install the scanners! Thank you very much for choosing our product ,if you have any question,please send email to me. - Page 2 USER MANUAL:PT-40K Scanner Set Date:03/2009 Checking Parts Please make sure the following parts are included: 2 Scanners 2 Driver board 2 Replacement mirrors 1 Scanne mount 1 power supply(PUS) 2 Cables driver to scanner 2 Cables driver to PUS 1 User manual...
- Page 3 USER MANUAL:PT-40K Scanner Set Date:03/2009 The ILDA standard Driver is set too fast or output speed of computer is too slow . The inner circle is larger than the green square . 12/30K ILDA Driver and output speed matches together .
- Page 4 The bracket is isolated from ground. Do not use cheap and unshielded cable. We recommend to use the SpaceLas only with SpaceLas cables.These cables are tested and designed for this driver. We do not offer any warranty, if other cables are used.
- Page 5 USER MANUAL:PT-40K Scanner Set Date:03/2009 Driver Output PDA PDB AGC 0V Position Scale Lineartity Offset Servo Size Signal In + - 0V Legend: Offset: Electrical offset of the driver, not the galvo! Is adjusted in factory. HFD: HighFrequency Damping. Corrects undershoots LFD: LowFrequency Damping Corrects overshoots.
- Page 6 USER MANUAL:PT-40K Scanner Set Date:03/2009 Scanne mount Driver board Page 6 of 6...
Need help?
Do you have a question about the PT-40K and is the answer not in the manual?
Questions and answers