Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Valoya RX400
Summary of Contents for Valoya RX400
- Page 1 INSTALLATION GUIDE RX-Series Version 2018.1 +358 10 2350 300 www.valoya.com...
- Page 2 A instalaç�o inapropriada pode causar danos na Felaktig installation kan leda till skador p� per- L’installazione non corretta pu� causare lesioni alle luminária e ferimentos nas pessoas. soner och lampan. persone e danni alla lampada. www.valoya.com +358 10 2350 300 Version 2018.1...
-
Page 3: Before You Begin
19. As a precaution, use suitable eye protection if working for long periods under high intensity lighting. 20. Dispose of all waste in accordance with local regulations. 21. The external flexible cable of the luminaire is only replaceable by Valoya. IMPORTANT Installation must be carried out by qualified persons, and according to the electrical safety rules &... -
Page 4: Delivery Check
In all cases please take pictures as evidence and contact us as soon as possible by phone or e-mail. Check package Check content Check operation If problems, contact us PART IDENTIFICATION Luminaire Mains input mating connector (field installable) Standard hangers (x2) Optional hangers (x2) www.valoya.com +358 10 2350 300 Version 2018.1... -
Page 5: Technical Specifications
Technical Specifications SPECIFICATIONS (TYPICAL) RX400 Total Power (W) Input voltage, nominal (VAC) 100 - 240, 277 Input current (A) 2.45 A @ 230 V Frequency (Hz) 50 / 60 Power Factor > 0.95 Dimmable (IEC 60929 Annex E) Yes (0-10V) -
Page 6: Product Dimensions
Technical Specifications PRODUCT DIMENSIONS RX400 Height incl. driver (mm/in) 166 mm / 6.5 in Height (mm/in) 99 mm / 3.9 in Length (mm/in) 347 mm / 13.7 in Width (mm/in) 382 mm / 15 in Screw hole diameter ((mm/in) 5 mm / 0.2 in Bolt fitted head size (mm/in) 10 mm / 0.4 in... - Page 7 6.5 mm / 0.25 in (4x) OPTIONAL HANGER (2X) Chain length (mm/in) 500 mm / 19.7 in CABLES Mains cable (mm/in) 300 mm / 11.8 in Dimming cable (mm/in) 300 mm / 11.8 in Version 2018.1 +358 10 2350 300 www.valoya.com...
-
Page 8: Installation Instructions
Installation Instructions LUMINAIRE ORIENTATION No other orientation is permitted METHOD A (STANDARD HANGER) 10 mm spanner METHOD B (OPTIONAL HANGER) Possible carabiner connection points www.valoya.com +358 10 2350 300 Version 2018.1... - Page 9 4) If dimming is to be used, connect to the “+” and “-” of a compatible current sink dimmer/controller. 5) Connect the mains cable to the mains supply. Current sink controller (Check compatibility) Mains (AC) connectors Dimming (DC) connectors Connect: • Pin 1 (dimming +) • Pin 2 (dimming -) Version 2018.1 +358 10 2350 300 www.valoya.com...
-
Page 10: Electrical Recommendations
Connect pins 1 (+) and 2 (-) only. See also: https://bit.ly/2sZKg5B Remove mating part & discard blanking end cap Insert your cable (2-core) Connect: Pin 1 (dimming +) Trim excess wire Reconnect & tighten Pin 2 (dimming -) www.valoya.com +358 10 2350 300 Version 2018.1... - Page 11 Electrical Recommendations MCBS (MINIATURE CIRCUIT BREAKERS) Use only MCB’s with Type C trip characteristics according to EN 60898 with Valoya luminaires. MCB loading table Figures include the luminaire and LED driver. Practical quantities will depend strongly on the site circuit reactance.
-
Page 12: Surge Protectors
Requirements for use, and the needed RCD rating, will vary depending on the type of installation. Valoya luminaires are designed to be installed in fixed electrical installations where no plug is permitted for connecting the luminaire to the mains supply. - Page 13 Dimming Guide DIMMING METHODS Differences in dimming methods exist depending on the LED driver (power unit) used by the Valoya luminaire. • 1-10V: Minimum dimmed light output is approximately 10% (Spectra dependent). The mains supply to the driver must be switched in order to turn the light on & off.
- Page 14 Helvar www.helvar.com 140 (TK4) Honeywell Peha www.peha.de D 430 Jung www.lutron.com Electronic potentiometer, 1-10 V Lutron www.jung.de Osram www.osram.com Dim MCU 1-10V Philips www.lighting.philips.com UID8600/00 1-10V Dimmer Priva www.priva.com www.ram-group.com Siemens www.siemens.com 5TC8424 www.valoya.com +358 10 2350 300 Version 2018.1...
- Page 15 Using a compatible current sink 0-10V dimmer Dimmer connections Luminaire Luminair e A - Control (+) B - Control (-) LED Driver LED Driver DIM + DIM - DIM + DIM - Live (L) Neutral (N) Earth (E) Version 2018.1 +358 10 2350 300 www.valoya.com...
-
Page 16: Care And Maintenance
If the luminaire now works, then the original LED driver, or mains supply to it may be at fault. • Note details of the problem (product type, quantity, problem description…) and contact Valoya for further assistance. If a problem reoccurs or affects many products at the same time, please contact Valoya (www.valoya.com/support) for further advice and assistance. -
Page 17: Warranty & Claims
Warranty shall be void in the event any repairs or alterations not duly authorized by Valoya in writing are made to the Product by any person. - Page 18 W www.valoya.com 2018.1 Valoya® is a registered trademark of Valoya Oy in the European Community, the USA and certain other countries. Due to our continuous program of product development, data is subject to change without notice. www.valoya.com +358 10 2350 300...