B&C Speakers Line Array Source WG800 Specification Sheet

WG800
Line Array Source
Line Array optimized Waveguide
Max. horizontal coverage 120°
220 W continuous program power capacity
75 mm (3 in) aluminium voice coil
Composite Polyimide/Titanium diaphragm
500 – 17000 Hz response
108 dB sensitivity

Specifications

Horizontal Coverage
Active Radiating Factor
Recommended Crossover (1)
Waveguide Material Cast Aluminium
Nominal Impedance
Minimum Impedance
Nominal Power Handling (2)
Continuous Power Handling (3)
Sensitivity (1W/1m) (4)
Frequency Range (5)
Voice Coil Diameter
Winding Material
Diaphragm Material
Polyimide/Titanium
Flux Density
Mounting and Shipping Info
Waveguide Baffle Cutout 153x25 mm (6x1 in)
Driver diameter 124 mm (4.9 in)
Dimensions 163x130x235 mm
(6.4x5.1x9.3 in)
Net Weight 3.3 kg (7.3 lb)
Shipping Weight 3.4 kg (7.5 lb)
Shipping Box 245x140x175 mm
(9.6x5.5x6.9 in)
1 12 dB/oct. or higher slope high-pass filter.
2 2 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
5 Waveguide mounted on 90°x10° bell horn
120° max
93.7 %
0.8 kHz
8 ohm
8.6 ohm
110 W
220 W
108 dB
0.5 -17 kHz
75 mm (3 in)
Aluminium
Composite
1.85 T