Getting Started - StarLab Science First Digital Setup And Operation Manual

Thank you for your purchase of the Digital STARLAB
family of educators! We hope the versatility and excitement inherent in the STARLAB
your students and visitors for years to come.
In this section, we provide the information you need to set up and operate the Digital STARLAB
projection system and dome successfully. In addition, we include a number of maintenance tips to keep
your STARLAB
system in peak operating condition.
®
Our commitment to you:
is committed to manufacturing the finest digital projection system available today
Science First ®
combined with the highest possible level of service. You can contact us for any reason - a real person
will answer the phone each time!
In addition to our team below (whom you may have met at trade shows throughout the country), our
mechanical engineer and production foreman have spent many hours assembling our products from soup
to nuts. If we don't know the answer the exact moment you call, we'll find it for you!
We are always looking for ways to improve our products and service in any manner possible. Have an
idea? Please give us a call!
It is recommended that you contact Starlab prior to setting up your system for the
first time.
Important Note: Your system has been carefully calibrated by Starlab. It
does not need any further adjustment. Do not adjust any mechanical fas-
teners (e.g. screws), or computer/projector settings unless specifically di-
rected to do so by a member of the Starlab Team! Damage to your system
may occur, and any repairs needed may not be covered under warranty.
Nathaniel Bell,
Company Co-owner,
STARLAB
Support
2
Science First
800-875-3214 • 904-225-5558 • FAX 904-225-2228 • www.starlab.com

Getting Started

Technical
®
/ STARLAB
® ® • 86475 Gene Lasserre Blvd, Yulee, FL 32097 USA
projection system. We welcome you to our
®
Helmut Albrecht
STARLAB
Service Specialist
will be delighting
®
®
Customer
®