Page 2
Apex system to control up to six 230 volt items such as lights, pumps, fans, heaters, chillers and more. PHYSICAL INSTALLATION The EnergyBar 6 should be securely mounted in a location free from moisture. Use wood screws through the mounting tabs or if mounting on drywall, use drywall anchors (mounting screws and anchors not included).
Page 3
Active electrical current monitoring and logging through the AquaController Apex. • Fail-safe setting. If communication failure occurs between the AquaController Apex and the EnergyBar 6, each outlet can be configured to revert to a user settable default setting. • High reliability direct wired connection to the Apex System through the AquaBus (does not use X10).
TECHNICAL SPECIFICATIONS Number of outlets Maximum Current Draw per Outlet 8 Amps Maximum Allowed Current Draw (total of all outlets) 10 Amps Number of AquaBus Connectors EnergyBar 6 - Setup Guide Page 3...
Page 5
If the product has been exposed to rain or water. o If the product has been dropped or the case has been damaged. o If the product exhibits a distinct change in performance, indicating a need for service. EnergyBar 6 - Setup Guide Page 4...
Page 6
1 year from the date of purchase. If repair or adjustment is necessary and has not been the result of abuse, Neptune Systems warrants this product to be free from defects in material and workmanship for a period of 1 year from the date of purchase.
Page 7
Some collection points accept products for free. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. EnergyBar 6 - Setup Guide Page 6...
Need help?
Do you have a question about the EnergyBar 6 and is the answer not in the manual?
Questions and answers