Do you have a question about the RR-500 and is the answer not in the manual?
Questions and answers
Summary of Contents for Simonds RR-500
Page 1
OPERATING INSTRUCTIONS AND SAFETY MANUAL MODELS RR-500, RR-625, RR-875, RR-1000, RR-1250 CAREFULLY READ THIS MANUAL BEFORE OPERATING TOOL PASSENGER LOCOMOTIVE MODEL NUMBER FREIGHT AXLE CAP SCREW LENGTH WEIGHT SIZE AXLE CLASS AXLE CLASS 1/2” 9.5” 3.2 lbs. RR-500 5/8” & 3/4”...
Page 2
These pneumatic tools are designed to bend tabs on railroad wheels. They are well balanced and ergonomic. Specifically designed for bending tabs on railroad wheel nuts. Any other application please consult the factory. SAFETY INSTRUCTIONS 1. Read this manual and understand all safety instructions before operation of the tool. If you have questions please contact our authorized distributors or the factory.
Page 3
LUBRICATION AND MAINTENANCE 1. Disconnect the air supply from the tool before lubricating. 2. Your tool requires lubrication before you use it the first time. 3. Wipe off excessive oil at the exhaust. Excessive oil will damage O’rings of tool. If in-line oiler is used, manual lubri- cation through air inlet is not required on a daily basis.
Page 4
1 RR‐3201 Side Plate 2 RR‐0501 O'Ring 2 RR‐2401 Trigger 1 RR‐0601 O'Ring Cap 4 RR‐2501 Guard Trigger 1 RR‐0701 Spacer 2 RR‐2601 Latch 1 *** ‐ Consult Factory on Proper Jaw for Tool. Must have Tool Number Tool Number Jaw Part Number RR-500 RR-500-1 RR-625 RR-625-1 RR-875 RR-875-1 RR-1000 RR-1000-1 RR-1250 RR-1250-1...
Need help?
Do you have a question about the RR-500 and is the answer not in the manual?
Questions and answers