Streetwize SWPB1 Manual

Streetwize SWPB1 Manual

Emergency jumpstart & powerbank

Advertisement

SWPB1 Manual AW:Layout 1

Charging smart phones etc:

1. Insert the USB charging plug into the 5V 2.1A USB output port.
2. Insert the correct adaptor for the device to be charged.
3. When the cable is connected Press the "On" button to charge the device.
2
1
Charging the Emergency Jumpstart & Powerbank:
1. Insert either the 12V In-car charger or 240V mains power cable into the
15V/1A input port on the unit.
1. Insert the plug end into the require power socket. The LED's (blue) will
flicker to indicate charging, 5 lit LED's will indicate a FULL charge.
1
The WEEE symbol
on this product means that this product should be ethically
dismantled or recycled to minimise environmental impact. Please check with your
local authority for more information.
IMPORTANT: ADDITIONAL SAFETY INFORMATION: This Jumpstart & Powerbank is
NOT intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they are
supervised or have been given instruction concerning use of the Jumpstart &
Powerbank by a person responsible for their safety.
RoHS
COMPLIANT
Streetwize Accessories:
Sales enquiries: sales@streetwizeaccessories.com
Technical enquiries: support@streetwizeaccessories.com www.streetwizeaccessories.com
6/10/15
12:29
Page 1
3
2
Lancashire
BL9 9NB
Next Generation Portable
Emergency Jumpstart
& Powerbank
A POWERFUL but compact 400Amp-(peak) emergency Jumpstart for most 12V
vehicles. PLUS a Power Bank that also provides HOURS OF PORTABLE POWER for
smart phones, laptops, or tablets and much more when out and about!
Please read these instructions carefully
before operating this device.
It is recommended to charge the
unit for 3 hours before
any use.
Emergency Jumpstart & Powerbank contents:
Emergency Jumpstart & Powerbank
12V battery clips
USB charge cable with 4 built-in
assorted adaptors.
240V mains plug.
12V in-car charging plug.
interchangeable power
lead with 8 adaptors.
12V - 400Amp

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SWPB1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Streetwize SWPB1

  • Page 1 SWPB1 Manual AW:Layout 1 6/10/15 12:29 Page 1 Next Generation Portable Charging smart phones etc: 1. Insert the USB charging plug into the 5V 2.1A USB output port. Emergency Jumpstart 2. Insert the correct adaptor for the device to be charged.
  • Page 2 SWPB1 Manual AW:Layout 1 6/10/15 12:29 Page 3 Emergency Jumpstart Operating Instructions: Charging Instructions: generally a vehicle can be jump started with only 2 power LED’s (blue) lit on The unit has multiple charging outputs 12V & 19V. Press the power on button the unit, however it is preferable to use a fully charged unit.

Table of Contents