Dynabrade 51622 Safety, Operation And Maintenance Manual

For Serial No. 02A1000 and Higher
Pencil Grinder
Turbine-Driven Air Motor
SAFETY, OPERATION AND MAINTENANCE - SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL
Model RPM Insert
51622 35,000
51623 35,000
51624 35,000
51629 50,000
51630 50,000
51631 50,000
60,000
51632
51633 60,000
51634 60,000
51700 60,000
51701 60,000
51702 60,000
50,000
51703
51704 50,000
51705 50,000
51706 35,000
51707 35,000
51708 35,000
51730 50,000
60,000
51731
51732 50,000
51733 60,000
51750 60,000
51753 50,000
51756 35,000
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES AT WWW.DYNABRADE.COM
Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel as well
as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Standards Institute (ANSI) Safety
Code for Portable Air Tools – B186.1. For additional safety information, refer to Safety Requirements for the Use, Care and Protection of Abra-
sive Wheels – ANSI B7.1, Code of Federal Regulation – CFR 29 Part 1910, European Committee for Standards (EN) Hand Held Non-Electric
Power Tools – Safety Requirements and applicable State and Local Regulations.
Read and understand tool manual before
work starts to reduce risk of injury to
operator, visitors, and tool.
Eye protection must be worn
at all times, eye protection to
conform to ANSI Z87.1.
Respiratory protection to be used when
exposed to contaminants that exceed the
applicable threshold limit values required by law.
Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

SAFETY INSTRUCTIONS

CAREFULLY READ AND UNDERSTAND
PNEUMATIC TOOL SAFETY GUIDELINES (P/N 00001676) BEFORE HANDLING OR USING TOOL.
Carefully Read all instructions before operating or servicing any Dynabrade
Products offered by Dynabrade are not to be modified, converted or otherwise altered from the original design.
Tool Intent:
Pencil Grinders are ideal for light deburring, deflashing, surface preparation, cleaning and finishing using proper accessories.
DO NOT USE tool for anything other than its intended applications.
Training: Proper care, maintenance, and storage of your air tool will maximize tools performance and reduce chance for accident.
Employer's Responsibility: Provide operators with safety instructions and training for safe use of tools and accessories.
REPORT TO YOUR SUPERVISOR ANY CONDITION OF THE TOOL, ACCESSORIES, OR OPERATION YOU CONSIDER UNSAFE.
Style
1/8" Central Vacuum
1/8" Central Vacuum, Ext.
3 mm Central Vacuum
1/8" Central Vacuum
1/8" Central Vacuum, Ext.
3 mm Central Vacuum
1/8" Central Vacuum
1/8" Central Vacuum, Ext.
3 mm Central Vacuum
1/8" Standard
3 mm Standard
3/32" Standard
1/8" Standard
3 mm Standard
3/32" Standard
1/8" Standard
3 mm Standard
3/32" Standard
1/8" Ceramic Bearing
1/8" Ceramic Bearing
3 mm Ceramic Bearing
3 mm Ceramic Bearing
1/8" Extension
1/8" Extension
1/8" Extension
WARNING
Practice safety requirements. Work alert,
have proper attire, and do not operate tools under
the influence of alcohol or drugs.
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or local
statues, ordinances and/or regulations.
Air line hazard, pressurized supply lines and flexible
hoses can cause serious injury. Do not use damaged,
frayed or deteriorated air hoses and fittings.
® Abrasive Power Tool.
Parts Page Reorder No. PD10•37
Effective October, 2010
Supersedes PD10•11
Model 51706
Shown