1. Manuals
  2. Brands
  3. Data Display Group Manuals
  4. Monitor
  5. DS-91-981
  6. User manual

Data Display Group DS-91-981 User Manual

Pos-line series monitors from 80 cm (31.5“)
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

User Manual

POS-Line Series
POS-Line monitors from 80 cm (31.5")

Advertisement

Table of Contents
loading

Summary of Contents for Data Display Group DS-91-981

  • Page 1: User Manual

    User Manual POS-Line Series POS-Line monitors from 80 cm (31.5“)
  • Page 2 Reproduction of this manual in parts or entirely without the previous authorization of Data Display Group is prohibited. Data Display Group is not liable for errors and collateral or subsequent damage which result from supply, deployment or any other utilisation of this document.

  • Page 3: Table Of Contents

    Table of Contents 1. General Specifications ................4 Chassis Versions ..................5 Scope of Delivery ..................7 General Safety Regulations ............... 8 First Installation ..................11 Touch Sensors ................... 14 POS-Line Video PME ................. 15 POS-Line Video PIII ................... 23 POS-Line IQ Intel Atom ................32 10.

  • Page 4: General Specifications

    This user manual is valid for POS-Line monitors up to 139 cm (54.6”). The POS-Line monitors are offered in different screen sizes and with various controllers and other options. Important note: This user manual is complemented by other additional documents when indicated. All documents are also available for download from Data Display Group web site: www.datadisplay-group.com. POS-Line monitor versions:...

  • Page 5: Chassis Versions

    Chassis Versions Chassis Versions Various front bezels are available for POS-Line displays. A front bezel changes the look of the display. Note: All photos and graphic representations in this document show open frame displays. All explanations shall also apply to displays with front bezel. Displays with various front bezel designs: Open frame display (without bezel)
  • Page 6 Chassis Versions Display with true-flat glass and bezel For VESA mounts. Display with aluminum bezel For VESA mounts.

  • Page 7: Scope Of Delivery

    Scope of Delivery Scope of Delivery When unpacking the monitor, please check if the following accessories are included in the shipment: Note: Pictures can differ from actually supplied products. DATA DISPLAY GROUP Product information Accompanying-DVD (Manuals, Datasheets, Driver, Drawings) RGB cable...

  • Page 8: General Safety Regulations

    Please read this safety information carefully for your personal safety and for the prevention of property damage. In case of a malfunction, immediately disconnect the power plug and contact your dealer or the next Data Display Group service cen- tre. A malfunction is also considered if the housing, a control element or cable is damaged or if liquids or other objects penetrate the monitor.
  • Page 9 General Safety Regulations Safety guidelines for the handling of LCD monitors • If the device is not used for a long period of time, unplug the power cable. • Do not unplug the power cable while the device is powerd on, except for emergencies. •...
  • Page 10 General Safety Regulations • Ensure sufficient ventilation of the device. • Keep a minimum distance of at least 10 mm devices to the wall, for devices with inte- grated PC of at least 40 mm. • Ensure compliance with the operating temperature. •...

  • Page 11: First Installation

    First Installation First Installation Position of connectors and controls All connectors for power and cables are located at the bottom of the back side of the display. Video signal cables and OSD keyboard (video series only) Power cable and on/off switch Connectors for PC-box (option) 110-230V AC outlet Mounting...
  • Page 12 First Installation Mounting with VESA compatible brackets POS-Line displays are shipped with factory installed mounting angles for VESA compatible brackets. The mounting angles are, without further modification suited for landscape or portrait mode and comply with the minimum required distances between the back side of the display and the wall. The operating position of the device is perpendicular (90 degrees to the floor). Pay attention to the permissible tilt angle for wall mounting. The device can be operated both in landscape mode and in portrait mode. The information is for positioning to note on the back of the device, always.
  • Page 13 First Installation Connecting to power POS-Line displays require a voltage of 110V - 230V AC. Note: Install all data cables to external devices before connecting the display to power. • Switch the on/of switch in position off. • Connect the power cable to the display. • Connect the power cable to a power socket. • Switch the display on .

  • Page 14: Touch Sensors

    Touch Sensors Touch Sensors POS-Line monitors are available with touch option. Depending on the panel size, different touch systems and touch technologies are used. If the monitor has been ordered with touch option, the touch sensor and touch controller are installed at factory. POS-Line IQ and IoT: The actual touch driver is pre-installed on these systems if ordered with operating system.

  • Page 15: Pos-Line Video Pme

    POS-Line Video PME POS-Line Video PME Connectors and OSD buttons of POS-Line Video PME series OSD Keyboard Power supply On/O Button DisplayPort HDMI VGA (RGB) USB (remote OSD) Headphones USB (Touch) Connecting to a PC with VGA cable VGA (RGB) VGA (RGB) Connecting to a PC with HDMI-DVI cable HDMI...
  • Page 16 POS-Line Video PME Connecting to a PC with HDMI cable HDMI HDMI Connecting to a PC with DisplayPort cable DisplayPort DisplayPort Connecting the Remote-OSD to a PC with USB cable USB (remote OSD) Connecting the touch to a PC with USB cable (for displays with touch sensor only) USB (Touch)
  • Page 17 POS-Line Video PME Remote OSD control To control the OSD menu of the display remotely from a PC, use a USB cable and connect the display to your PC as described above. Please read the handbook for the remote control carefully. Please see the instructions for the remote control you find in the enclosed DVD.
  • Page 18 POS-Line Video PME The green/red LEDs (single package) on the external keypad show the current status of the board: Color Meaning Remark Green Signal found Green blink Search signal Power safe mode LED off Monitor off OSD menu Image Menu Brightness: Panel brightness adjustment.
  • Page 19 POS-Line Video PME Display Menu Auto-adjust: Performs auto-adjustment on the VGA input image. Phase: This function is a slider to adjust the sampling phase of the analogue interface. For optimum image quality, input pixels should be sampled at the ideal sampling points.
  • Page 20 POS-Line Video PME Sound Menu Volume: Slider bar to adjust volume. Mute: Mutes audio. Output: Chooses between speakers and headphone. Only one can be active at a time (Speakers are not avail- able for POS-Line monitors). Output Sub Menu Speakers: Toggles speakers on/ off.
  • Page 21 POS-Line Video PME Input Sub Menu Display Port: Select display port as input signal. VGA: Select VGA as input signal. DVI/HDMI: Select DVI/ HDMI as input signal. Auto Scan: Enable/ disable input auto-scan. OSD Settings Sub Menu Timer: Sub menu for timer settings. Rotation: Sub menu for rotation settings.
  • Page 22 POS-Line Video PME Rotation Sub Menu Rotation: Rotates the OSD menu. Reset Sub Menu Reset: Performs factory reset. EDID Write Protect Sub Menu Write protect: EDID write protect on/ off.

  • Page 23: Pos-Line Video Piii

    POS-Line Video PIII POS-Line Video PIII Connectors and OSD buttons of POS-Line Video PIII series OSD Keyboard Power supply On/O Button RS232 VGA (RGB) S-Video Composite Video USB (Touch) Connecting to a PC with VGA cable VGA (RGB) VGA (RGB) Connecting to a PC with DVI cable Connecting to a PC with DVI-HDMI cable HDMI...
  • Page 24 POS-Line Video PIII Connecting to an external device with S-Video cable S-Video S-Video Connecting to an external device with Composite Video cable Composite Video Composite Video Connecting the Touch to a PC with USB cable (for displays with touch sensor only) USB (Touch) Connecting the Touch to a PC with RS232 cable (for Remote OSD only) RS232...
  • Page 25 POS-Line Video PIII Remote OSD control To control the OSD menu of the display remotely from a PC, use a RS 232 cable and connect the display to your PC as described above. Please read the handbook for the remote control carefully. Please see the instructions for the remote control you find in the enclosed DVD.
  • Page 26 POS-Line Video PIII Leave OSD menu when in main or sub menu Exit Leave sub menu when in sub menu The green/red LEDs on the external keypad show the current status of the board: Color Meaning Remark Green Signal found Green blink Search signal Power safe mode...
  • Page 27 POS-Line Video PIII Advanced Color Sub Menu Color Temp: Allow selection of different color temperature schemes. Selections are user, sRGB, 4200K, 5000K, 5400K, 6500K, 7200K, 9300K. User Color: Create custom color scheme. ADC: Auto Color-Adjust. Performs auto fine tuning on the ADC (RGB, S-Vid- eo and Composite only).
  • Page 28 POS-Line Video PIII Advanced Video Processing Sub Menu Main DCDi: Turns DCDi on/ off on main channel. MADI Mode: Changes Motion Adaptive De-In- terlacing between normal/ off/ adaptive modes. Advanced Film Mode Sub Menu Detection: Selection of Video-3:2/ Video-2:2/ Video-3:2-2:2/ off. Mode: Selection of Normal 3:2 or other future modes.
  • Page 29 POS-Line Video PIII PIP (Picture in Picture) Sub Menu PIP mode: Toggle between Off, PAP-Tall, Side- by-Side, Small PIP and Large PIP. Vertical: Vertical position of PIP image. Horizontal Horizontal position of PIP image. Transparency: Transparency of PIP image. Tiling Sub Menu (for video walls) Horizontal Total: Defines the total horizontal number of displays.
  • Page 30 POS-Line Video PIII Position Settings Menu (for DVI, S-Video and Com- ponent Video Signals) Width: Adjusts total width of the image by stretching or shrinking. Height: Adjusts total height of the image by stretching or shrinking. Horizontal Start: Changes the starting point of the image horizontally, without altering height.
  • Page 31 POS-Line Video PIII Advanced Settings Sub Menu (DVI mode only) OSD Settings Menu Horizontal: Move the OSD in horizontal direc- tion. Vertical: Move the OSD in vertical direction. Blend: OSD transparency adjustment. Time Out: This function determines after how many seconds the OSD will close itself.

  • Page 32: Pos-Line Iq Intel Atom

    POS-Line IQ Intel Atom POS-Line IQ Intel Atom Note: The delivery includes a driver DVD with all Atom main board drivers! Note: This POS-Line display is equipped with a battery. Please read the following note carefully: • Unplug the power cable before exchanging the battery. • There is a risk of explosion if the battery is not installed correctly.
  • Page 33 POS-Line IQ Intel Atom Mounting and dismounting the PC box Note: The display must be switched off before dismounting or mounting the PC box. Not confirming to the rules may electron- ically damage the display and the PC box. To remove the PC box please proceed as follows: • Make sure that the display is completely disconnected from power. Unplug the power cable or switch the monitor off with the main power on/off switch.
  • Page 34 POS-Line IQ Intel Atom Operating the PC box without display The PC box can be operated as stand alone device without display for maintenance purposes. This requires an external power supply with cable (12V DC, 60 Watt) which is available as kit for maintenance (order number DS-91-945). Please connect monitor, keyboard and mouse before switching on power.
  • Page 35 POS-Line IQ Intel Atom Connectors of POS-Line IQ Intel Atom series Power supply On/ O Button Button brightness VGA (RGB) HDMI USB 3.0 1x / 2.0 3x LAN 2x Push-button Connecting to a network using a patch cable Connecting to a PC using a cross-over cable Connecting keyboard and mouse with USB cable...
  • Page 36 POS-Line IQ Intel Atom Connecting an external monitor with HDMI cable HDMI HDMI Connecting an external monitor with VGA cable VGA (RGB) VGA (RGB) Power on/off The display boots automatically after connecting to power. Use the push button to switch the display on and off. If in normal operation, push the push button once to shut down the system into sleep mode.
  • Page 37 POS-Line IQ Intel Atom BIOS settings A Phoenix UEFI Flash BIOS is installed on the PC main board. To change BIOS settings press the ‘F2’ key on your keyboard during the boot process of the PC. Operating systems An operating system is pre-installed if your POS-Line display has been ordered with this option. In this case all main board drivers or touch drivers are installed.

  • Page 38: Pos-Line Iq Intel I3/I5

    POS-Line IQ Intel i3/i5 POS-Line IQ Intel i3/i5 Note: The delivery includes a driver DVD with all Ontario main board drivers! Note: This POS-Line display is equipped with a battery. Please read the following note carefully: • Unplug the power cable before exchanging the battery. • There is a risk of explosion if the battery is not installed correctly.
  • Page 39 POS-Line IQ Intel i3/i5 Mounting and dismounting the PC box Note: The display must be switched off before dismounting or mounting the PC box. Not confirming to the rules may electron- ically damage the display and the PC box. To remove the PC box please proceed as follows: • Make sure that the display is completely disconnected from power. Unplug the power cable or switch the monitor off with the main power on/off switch.
  • Page 40 POS-Line IQ Intel i3/i5 Operating the PC box without display The PC box can be operated as stand alone device without display for maintenance purposes. This requires an external power supply (12V DC, 80 Watt) which is available as option (order number DS-30-615). Please connect monitor, keyboard and mouse before switching on power.
  • Page 41 POS-Line IQ Intel i3/i5 Connectors of POS-Line IQ Intel i3/i5 series Power supply On/O Button VGA (RGB) USB 3.0 4x / 2.0 4x LAN 2x COM 2x MIC / Spk / Line-in PS/2 Push-button Connecting to a network using a patch cable Connecting to a PC using a cross-over cable Connecting keyboard and mouse with USB cable...
  • Page 42 POS-Line IQ Intel i3/i5 Connecting keyboard and mouse with PS/2 cable PS/2 Connecting an external monitor with DVI cable Connecting an external monitor with VGA cable VGA (RGB) VGA (RGB) Connecting active speakers with audio cable Line-out Line-in...
  • Page 43 POS-Line IQ Intel i3/i5 Power on/off The display boots automatically after connecting to power. Use the push button to switch the display on and off. If in normal operation, push the push button once to shut down the system into sleep mode. The panel is switched off. If switched off, push the push button once to wake up the display.

  • Page 44: Pos-Line Videoposter

    POS-Line VideoPoster POS-Line VideoPoster Note: Further information on media player, play list structure, handling, utilization and supporting software modules are available at http://www.datadisplay-group.com/tft-controller/industrial-mediaplayers/ Note: This Gerhardt display is equipped with a battery. Please read the following information carefully: • Unplug the power cable before exchanging the battery. • There is a risk of explosion if the battery is not installed correctly.
  • Page 45 POS-Line VideoPoster Connecting to a PC using a cross-over cable Connecting an USB stick Connecting active speakers Line-out Line-in Connecting a signal source using a HDMI cable HDMI...
  • Page 46 POS-Line VideoPoster Connecting a signal source using a HDMI-DVI cable HDMI Factory configuration at the time of delivery POS-Line VideoPoster is a network (Ethernet) device. Please note that inaccurate network configuration can have unintended influence on network operations and cause a breakdown of the entire network. To setup the device properly, you must be familiar with the basic operating parameters of your network.

  • Page 47: Functional Description

    POS-Line VideoPoster Functional description POS-Line VideoPoster is a networked stand alone media player to playback play lists. Operating systems or other client-based software components are not required. Play lists are based on a XML structure and can include videos and images. The media player controlls the play list.
  • Page 48 POS-Line VideoPoster Layout of the web interface: Information System Information: Here you can find all the information about the system like software revision. In case of a support request please add a printout of this page to your mail for a fast processing. View Logs: VideoPoster creates log files to allow an easy monitoring of operations. The following log files are available: Player – shows the log file of the video player and error messages. Updater – shows the log file of content updates and error messages. Setup Manager – shows the list of executed setup files. Event Manager – shows error messages of the event manager. Configuration Network Configuration: This page includes all entries for the network configuration. Click on „Submit Configuration“ to store...

  • Page 49: Pos-Line Iot

    POS-Line IoT POS-Line IoT The POS-Line IoT monitor is equipped with the Raspberry Pi compute module 3 (CM3). The specification can be found under the ® following link: https://www.raspberrypi.org/products/compute-module-3/ Note: The full driver package for the IoT monitor can be found on the enclosed DVD. The device is equipped with a battery.
  • Page 50 POS-Line IoT Connecting to a PC using a cross-over cable Connecting to an USB stick Connecting active speakers Line-out Line-in Connecting a signal source using a HDMI cable HDMI HDMI HDMI HDMI...
  • Page 51 POS-Line IoT Connecting a signal source using a HDMI-DVI cable HDMI Switch on/ off After the supply voltage has been applied, the IoT monitor starts automatically. To switch off, you must select „Shut down“ in the operating system. Operating systems The IoT Monitor comes with the operating system Raspbian, which is equipped with all necessary drivers.

  • Page 52: Webposter

    WebPoster WebPoster Connections and controls WebPoster are POS-Line IQ Onatrio devices with a special firmware, so the ports and operating in the „IQ Ontario“ must be observed. Connecting a mouse and keyboard is not supported with this firmware. Functional description The Industrial HTML Full HD Player is a complete solution for viewing Web pages.
  • Page 53 WebPoster Information System Information: This page contains all details about the system, such as, for example, the software version. If you contact our Support please add this page to your E-Mail to ensure a fast response. Restart Restart: Restart of the media player. Display of IP address and hostname When booting the HTML player‘s current IP address and the host name of the HTML player is displayed on the screen for about 5 seconds.

  • Page 54: Maintenance

    Data Display Group Service Centre together with all information as specified in the RMA process. Guarantee Exclusions and Limitations This guarantee does not apply to any defect for which Data Display group is not responsible and which includes, but is not limited to the following: •...
  • Page 55 81 cm (32“) must be shipped on pallets in upright position. Data Display Group does not assume liability for any customer data stored on products which are returned to Data Display Group. Limitations of Liability and Benefits With this guarantee declaration, Data Display Group exclusively guarantees that the product is free of material and manufacturing faults.

  • Page 56: Disposal

    Disposal Service addresses Germany Great Britain Distec GmbH Display Technology Ltd. Apollo Corp. Augsburger Str. 2b 5 The Oaks Business Village 87 Raynor Avenue, Unit 1 D-82110 Germering Revenge Road, Lordswood Ronkonkoma NY 11779 T +49 89 / 89 43 63 0 Chatham, Kent, ME5 8LF T +1 631 / 580-4360 B support@distec.de...

  • Page 57: Declaration Of Conformity

    Declaration of Conformity Declaration of Conformity Declaration Hereby the Distec GmbH declared that the unit EU is in compliance with the essential requirements and other relevant provisions of Directives 2014/30 / EU and 1999/5 / EC and 2014/35 / EU and 2011/65 /. The CE declaration of conformity can be found in English on the enclosed companion DVD.

Table of Contents