Thermonet 5259ESG Easy Setup Manual

EASY SETUP GUIDE: TOUCHSCREEN THERMOSTAT 5259 (5257, 5255)
Touchscreen Thermostat:
Contents
Step 1 Set time & date

Advanced setup

Step 2
Step 3 Manual mode
Step 4 Heating schedule
Step 1 Set the correct time & date
1. Tap the "power" button to switch unit on.
2. The backlight will fade after around 10 seconds.
3. Tap the "Clock" button to switch it back on at any point.
4. Press and hold the "Clock" button for around 7 seconds or until the minutes
begin to flash.
5. Use the "Up" and "Down" arrows to select the correct minute.
6. Tap the "Clock" button to switch to hour and use "Up" and "Down" to select the
correct hour.
7. Tap the "Clock" button again to edit the day.
8. Use the "Up" and "Down" arrows to select the correct day number:
1 = Mon 7 = Sun.
9. Tap the "Clock" button to save your time and date settings.
Step 2 Advanced settings
1. To access advanced settings switch the unit off by tapping the "Power" button.
2. Then press and hold both the "Power" and "Menu" button.
3. Tap the "Menu" button to switch to Sensor mode (2SEN) and set to OUT
4. Tap "Menu" x3 to switch to Frost Protection Mode (SLrP).
5. Set this to "On" using the "Up/Down" arrows.
6. Tap the "Menu" button to set your program days.
7. Tap "Up/Down" to set the program days.
8. Program options include:
6 days same & 1 separate day
7 days same
5 days & weekend (recommended)
Program off
9. Tap the "Menu" button and switch off to save your settings.
Step 3 Manual mode
1. You can switch between Manual and Schedule by tapping "Menu".
2. When in Manual mode, set a target temperature manually using the "Up/Down" arrows.
3. When the target temperature is set above the ambient temp, you will see the HEAT symbol (flame) below the
target temp.
If you have any questions or queries regarding this product, or any other products or services
WWW.
you can view our complete range online, WWW.THERMOGROUPUK.COM
Easy Setup Guide
5259ESG
Icon key:
- Up
- Down
- Power
- Manual control mode
- Program mode indicator
- Menu button
- Period 1
- Period 2
- Period 3
- Period 4
- Period 5
- Period 6
- Heating on
- Clock Button
1