Philips QG3060 Service Manual

Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
Features:
- Beardtrimmer and Hairclipper attachment.
- 2D Contour Tracking Beardtrimmer Comb; Comb
adapt to the contours of the face.
- Hair Length Selector; for adjustability of the Beardtrim-
mer Comb with 9 settings - resulting 9 different
hairlengths that can be cut between 2 mm and 18 mm.
- Profiler attachment; for trimming the neckline and
sideburns.
- Nose / ear / eyebrow Grooming Attachment.
- Charging indication (LED on Adapter).
- Maintenance free cutting elements: no oiling required.
- 3-Dimensional Rounded Chromium Steel Blades.
- Hairclipper Comb with 9 different settings - resulting 9
different hairlengths that can be cut between 4 mm and
20 mm.
- Precision shaper accessory
Safety
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Power system : Rechargeable
- Batteries : 1 x AA NiCd
- Charging period : NiCd : 10 hours
- Capacity : NiCd battery : up to 40 minutes
Published by Philips Domestic Appliances and Personal Care
05/03
Beard Trimmer - Personal Grooming Set
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- No specific issues.
REPAIR INSTRUCTION
- No specific issues.
OPTIONAL (accessories)
- No specific issues.
- SAP Coding: QG3040
NOTES :
* In order to guarantee the longest possible working
* If the battery is empty and the consumer wants to
* The appliance should be charged again, when not
Printed in the Netherlands
QG3060
QG3080
life of the battery :
- do not charge for more than 24 hours
- do not keep the charging unit permanently
plugged in
- discharge the battery completely once a year by
letting the motor run until it stops
trim his beard, the trimmer has to be charged for
at least 3 hours to have enough power for one trim
(10 min.)
used for a long period
© Copyright reserved
QG3040
QG3060
QG3080
Subject to modification