Cycle - Philips AVENT Avent SCF260/34 Troubleshooting Manual

TROUBLE SHOOTING GUIDE
Philips Avent SCF260/34 Digital Bottle Warmer 852022

CYCLE

6. Q: To stop the warming cycle.
A: Press the Power/Mode Selection Button and the warmer will beep and return to default settings.
7. Q: To start the warming cycle.
A: Once the correct mode, starting temperature and volume have been selected, press and hold the
Volume Selection/Start Button until the warmer beeps.
8. Q: If the lid is opened during warming cycle.
A: If the lid is opened at any time during the warming cycle, the lights on the display panel will flash and
the warmer will stop and return to default settings. In order to reset the warmer after the lid has been
opened, empty out any residual water, and then follow instructions for use from step 1 onwards. Since
this could occur at any stage of the warming cycle, milk or food should be discarded for safety reasons.
9. Q: Difficulty setting the appropriate amount of frozen food.
A: The maximum volume that may be selected when warming food from frozen is 230ml/8oz.
Customer Care Number
0800 289 064
Website: www.philips.co.uk
Customer Care opening times
Weekdays: Mon – Fri 9:00 am – 4:30 pm