Wiring Connections - Roadmaster RMCD100M Owner's Manual

Cd player and am/fm stereo receiver with auxilary input jack
Table of Contents

Advertisement

Installation

WIRING CONNECTIONS

Wiring Harness Socket
Wiring Harness & Plug
Blue/White: Auto-Antenna
5A
1A
Left Front
Speaker Wiring Notes
Follow the above wiring diagram to install the head unit with new or existing
speakers.
• This unit is designed for use with two
(2) speakers with an impedance be-
tween 4 Ohms to 8 Ohms.
• An impedance load of less than 4
Ohms could damage the unit.
Black: Ground
Yellow: Battery
Red: ACC Power
Front Speaker Out (L)
White (+)
White / Black (-)
Antenna Receptacle
Antenna Cable & Plug
RCA Line Out
Red = Right
White = Left
Grey (+)
Grey / Black (-)
• Never bridge or combine the speaker
wire outputs. When not using four speak-
ers, use electrical tape to tape the ends
of the unused speaker outputs to pre-
vent a short circuit.
• Never ground the negative speaker
terminals to chassis ground.
7
Right Front

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vrcd100m

Table of Contents