Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for LongSung Technology A9500
- Page 1 A9500 USER MANUAL A9500 user manual Page 1 of 37...
-
Page 2: Important Notice
Copyright: LongSung Technology (Shanghai) Co., Ltd. All rights reserved. TRADEMARKS LongSung Technology (Shanghai) Co., Ltd’s products are exclusively owned by LongSung Technology (Shanghai) Co., Ltd. References to other companies and their products use trademarks owned by the respective companies and are for reference purpose only. - Page 3 FCC ID: XHZA9500 or Contains FCC ID: XHZA9500 must be used. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. A9500 user manual Page 3 of 37...
-
Page 4: Table Of Contents
4.3. How to connect the external power supply ................... 32 4.4. How to use UART communication ....................33 4.5. How to reset the module ....................... 37 4.6. How to enter into the flight mode ....................37 A9500 user manual Page 4 of 37... - Page 5 Table Table 1：Document history ........................9 Table 2：Abbreviations and description ....................9 Table 3：EVB Kit list .......................... 11 A9500 user manual Page 5 of 37...
- Page 6 Figure 15：Driver is installing ......................21 Figure 16：Driver install successfully ....................22 Figure 17：A9500 ports display in the device manager ..............23 Figure 18：One key upgrade connection method ................23 Figure 19：A9500 module display in the device manager ..............24 Figure 20：An example of firmware file ....................
- Page 7 Figure 42：Send AT commands in the hyper terminal ................ 36 Figure 43：Reset key position view ....................37 A9500 user manual Page 7 of 37...
-
Page 8: Overview
1.1. Purpose of the Document The document takes A9500 as an example to explain the basic functions and main features of EVB, the setup of hardware and software environments and the implementation method of normal business on EVB. -
Page 9: Document History
1.4. Document History Table 1：Document history Versions Name Published Date Revised Description V1.0 Mao Jinjian 2017-03-09 Apply to A9500 V1.1 Zhang Yaowen 2017-03-16 Apply to A9500 Wangen Wei 2017-03-17 Modified V1.2 Zhang Yaowen 2017-04-24 Modify the UART related content Wangen Wei... - Page 10 Quadrate Phase Shift Keying Subscriber Identity Module TCP/IP Transmission Control Protocol/ Internet Protocol UART Universal asynchronous receiver-transmitter USIM Universal Subscriber Identity Module UMTS Universal Mobile Telecommunications System Universal Serial Bus WCDMA Wideband Code Division Multiple Access A9500 user manual Page 10 of 37...
-
Page 11: Introduction
PCM interface, power button, flight mode button, and reset button etc.. 2.1. Required Equipment The following table details the list of equipment required for the A9500 development environment. If not complete, please contact with LongSung company or its agents. -
Page 12: Setup And Install
The steps to insert the SIM/USIM card: Place the EVB face up and the SIM slot on the left side of the EVB board. As shown in the following figure: Figure 1：EVB front view A9500 user manual Page 12 of 37... -
Page 13: How To Connect Module
Figure 2：SIM card placement view 3.1.2. How to connect module After insert the SIM card, connect the module onto the develop board: Put the EVB face up and MiniPCIe connector is in the middle of the panel; A9500 user manual Page 13 of 37... -
Page 14: How To Connect Antenna
Figure 3：Mini-PCIe connector location view Insert A9500 module into the connector on the EVB board and secure it. As shown in the following figure: Figure 4：Module insert EVB view 3.1.3. How to connect antenna After insert the SIM card and module, then connect the antenna:... -
Page 15: How To Connect Usb Port
Tighten the antenna SMA connector and the RF transit cable SMA connector. 3.1.4. How to connect USB port According to the following steps to connect the USB port: Place the EVB board face up; A9500 user manual Page 15 of 37... -
Page 16: How To Connect The Uart Port
According to following steps to connect the UART port: Place the EVB board face up; The USB data cable B terminal is accessed to the J0702 interface on the lower left corner of EVB board, as shown in the following figure: A9500 user manual Page 16 of 37... -
Page 17: How To Power On
Insert the USB data cable A terminal into the USB interface of the PC. 3.1.6. How to power on A9500 only supports the boot up via pressing the power button Cnnect the VBAT and press the power button to start the module. The position of power button is shown... -
Page 18: How To Power Off
3.2.1. How to install the drivers The first time when USB data cable is connected to the PC and boot up the module, open the device management window to check that the USB modem driver is not installed: A9500 user manual Page 18 of 37... -
Page 19: Figure 10：Find New Hardware
Figure 10：Find new hardware Right click on the USB modem device and select to update the drivers: Figure 11：Update the drivers A9500 user manual Page 19 of 37... -
Page 20: Figure 12：Install The Drivers Manually
Select “Browse the computer to find the driver software”: Figure 12：Install the drivers manually Click on “browse”, select the A9500 driver and press “ok”: Figure 13：Select the driver path A9500 user manual Page 20 of 37... -
Page 21: Figure 14：Select The Drivers
Click on “next”: Figure 14：Select the drivers Driver is installing: Figure 15：Driver is installing A9500 user manual Page 21 of 37... -
Page 22: Figure 16：Driver Install Successfully
When prompt“windows already update the device drivers successfully”, press “finished” to end the driver installation. Figure 16：Driver install successfully Repeat above 1-7 steps to update the other A9500 uninstalled USB modem drivers. A9500 corresponding ports will appear in the device manager after the driver updated successfully. As shown in the following figure:... -
Page 23: How To Update The Firmware
Figure 17：A9500 ports display in the device manager 3.2.2. How to update the firmware A9500 provides the one key upgrade tool on windows. The firmware upgrade steps are as follows: Connect the USB, UART ports with USB cable: Figure 18：One key upgrade connection method Power on and wait the ports appear in the device manager. -
Page 24: Figure 19：A9500 Module Display In The Device Manager
Figure 19：A9500 module display in the device manager Double click on the A9500 firmware file, that is an executable file with the suffix as .exe; Figure 20：An example of firmware file When it displays “Ready” in the popup window, click on “start” button to start the firmware upgrading: Figure 21：Firmware upgrading start window\... -
Page 25: Figure 22：Firmware Is Upgrading
Notice: During the upgrading, it cannot disconnect the USB cable and the power supply(need ensure the power supply stability), otherwise it will cause damage to module. Figure 23：Finished on the firmware upgrading A9500 user manual Page 25 of 37... -
Page 26: Test And Debug
4. Test and Debug The EVB board can be used for TCP/IP transport and internet connection; in addition to the USB communication, A9500 also supports UART mode communication. This chapter will describe these related functions. 4.1. How to use USB communication Connect the EVB board to the PC with USB cable, and boot up the module;... -
Page 27: Figure 25：Check The Port Number
Switch to the modem page and check the LongSung USB Modem[AT] port is COM11; Figure 25：Check the port number Open the serial port tool (ex: Windows hyper terminal); Figure 26：New a hyper terminal A9500 user manual Page 27 of 37... -
Page 28: Figure 27：Select The Port Number
Select the COM port that is corresponding to the LongSung USB Modem[AT] port, example is COM11; Figure 27：Select the port number Select the baud rate as “115200” and data flow control as “none”, other options use the default values; Figure 28：Configure the hyper terminal A9500 user manual Page 28 of 37... -
Page 29: How To Do The Data Connection
The communication mode of PC and A9500 is AT command; you can send AT command to test if the communication is successful between the PC and A9500. Figure 29：Use hyper terminal to send AT commands 4.2. How to do the data connection Insert a SIM/USIM card that supports data into the EVB board. -
Page 30: Figure 30：Configure A New Network Connection
Control panel \ network and internet \ network and shared center, select to new a network connection; Figure 30：Configure a new network connection Click on “LongSung USB Modem[AT]” modem; Figure 31：Select modem A9500 user manual Page 30 of 37... -
Page 31: Figure 32：Input The Dial Number
Input *99***1# in the dial number, click on “connect”; Figure 32：Input the dial number Trying on the Internet connection; A9500 user manual Page 31 of 37... -
Page 32: How To Connect The External Power Supply
4.3. How to connect the external power supply In addition to the power supply with USB cable, EVB can also connect to an external power supply. The connection method is shown as below: A9500 user manual Page 32 of 37... -
Page 33: How To Use Uart Communication
Figure 35：External power supply connection view 4.4. How to use UART communication In addition to the USB communication, A9500 also supports the UART communication. The connection method is shown as below” Jump the jumper cap of CN0600 to UART TO USB;... -
Page 34: Figure 36：Uart Jumper Cap Configure
Figure 36：UART jumper cap configure Connect the USB cable to the J0702 interface of the EVB board; Figure 37：UART data cable connection view Check the UART port is COM1; Figure 38：Check the UART port A9500 user manual Page 34 of 37... -
Page 35: Figure 39：New A Hyper Termial
Figure 39：New a hyper termial Select the port, example is COM1; Figure 40：Configure the hyper terminal - 1 Select the baud rate as “115200” and data flow control as “none”, other options use the default values; A9500 user manual Page 35 of 37... -
Page 36: Figure 41：Configure The Hyper Terminal - 2
Figure 41：Configure the hyper terminal - 2 It can do the communication via the UART cable. Figure 42：Send AT commands in the hyper terminal A9500 user manual Page 36 of 37... -
Page 37: How To Reset The Module
Figure 43：Reset key position view Software reset Send AT+RESET in the serial port tool via USB or UART port, it can do A9500 software reset. 4.6. How to enter into the flight mode There has AT command to let A9500enter into the flight mode.