Advertisement
Using the PKP-ICON Keypad
The PKP-ICON works similarly to the other key-
pads described in your system's Instruction
Manual . For more information on individual
functions, see your system's Instruction Manual .
Viewing Open Zones
Before you can arm your system, all the zones
must be closed. If some zones are currently open,
the keypad will display "Open", and the Ready
System Functions - Quick Reference
The following chart lists the basic functions of your system and the keys to press for each function.
NOTE: Some functions may not be available on your system. Ask your installer for more information.
To do this:
Arm system (Away): ............................................... [access code], leave through entry/exit door
Arm system (Quick): ..............................................
Arm system (Stay): ................................................. [access code], do not exit premises
Arm system (No Entry Delay): ...............................
Bypass zones: .......................................................
Disarm system: ...................................................... [access code]
Exit premises when system armed: .......................
Reset smoke detectors: .........................................
Program access codes .......................................... refer to "Programming Access Codes" in Instruction Manual
Send Fire message: ...............................................
Send Auxiliary message: .......................................
Send Panic message: ............................................
Set system time and date: .....................................
Silence fire alarm: ..................................................
Silence intrusion alarm: ......................................... [access code]
Turn auto-arm on/off: ..............................................
Turn door chime on/off: ..........................................
Turn on bypassed zones (if Stay armed): ..............
View alarm memory: ..............................................
View troubles: ........................................................
© 1999 Digital Security Controls Ltd.
light will be off. To see the numbers of the open
zones, press
go to the open zones and close all doors and
windows, and make sure no one is present in zones
with motion detectors.
Viewing Zones in Alarm
If there is an alarm on your system the keypad will
display "Alarm" and will scroll the numbers of the
zones affected.
Press this:
OR press
(if enabled)
(from Ready state)
OR press
(if enabled)
[access code]
[two-digit zone number(s)],
OR press
(if enabled)
OR press
(press and hold for two seconds, if enabled)
(press and hold for two seconds, if enabled)
(press and hold for two seconds, if enabled)
[master code]
23:59) and date (month/day/year) as 10 digits: [hh:mm
MMDDYY]
[master code]
to toggle on or off OR press
(Troubles indicated by numbers 1-8 on top of keypad
display. See "Viewing Trouble Conditions" in Instruction Manual
for list of trouble definitions)
. Before you try to arm your system,
to exit
(if enabled)
, enter current time (24hr format: 00:00-
(if enabled)
Printed in Canada
29004721 R001
Advertisement
