Advertisement
WARNING: To avoid fire or electric shock, make sure power is OFF before beginning installation.
!
IMPORTANT: This device is to be installed in a wall box measuring at least 3 in. x 2 in. x 2-1/2 in. (7.6 x 5 x 6.3 cm) (standard single gang
electrical wall box) and wired in accordance with National Electrical Code.
Straighten each wire and strip
3/4 in. (1.9 cm) of insulation
from each wire.
1.
Insert the ground (green) or bare wire(s) into the hole(s)
labeled G (near green screw).
2.
Insert the two neutral (white) wires into the holes labeled
N (near silver screw).
3.
Insert the hot (black) wire into the hole labeled L-I
(near brass screw).
4.
Insert the load (black/red) wire into the hole labeled
L-O (near brass screw). The screw terminal accepts
14AWG-12AWG copper wire (12AWG maximum).
5. Tighten all screws firmly.
6.
Carefully fold wires into wall box and mount WiOn Wall
Switch into wall box using mounting screws (CC), then
attach a standard decorator-style wall plate (not included)
using screws (DD).
7.
Restore power by flipping the circuit breaker to the ON
position or re-installing the fuse to the circuit.
Indoor Wi-Fi Wall Switch INSTALLATION INSTRUCTIONS
3/4" (1.9 cm)
Ground
(Green)
Neutral
(White)
Neutral
(White)
Hot wire
(Black)
Load wire
(Black/Red)
CC
CC
WALL
DD
Wall Plate
(not included)
DD
Made in China
Advertisement
