Lmppos KS-380 series User Manual

User's Manual
KS-380 Series

Safety warning

Only the supplied AC power adapter and lithium battery is allowed
to use, otherwise it may cause device damage, battery leakage, fire,
and even explosion.
Do not put the battery into a fire or apply direct heat to it or
disassemble it, otherwise cause the battery leakage, fire, and even
explosion.
Please remove the battery from the printer and store separately if
the printer will not be used for a long period of time, otherwise cause
the battery leakage.
As the battery's liquid is corrosive, if there any case of operational
mistakes to cause leakage, please wash immediately with plenty of
clean water if skin or clothes contact it carelessly. If entering eyes,
wash with plenty of clean water at once and seek medical advice.

Safety notice

Do not touch the paper tear-off knife.
The print head is a heated part, please do not touch the print head
and other parts around it during or after the printing process.
Do not touch the print head and plug-in parts to avoid print head
damage.
Do not open the top cover when printing, otherwise may cause
printer work failure.
In order to get good print quality, and extend the device service life,
we suggest that using the recommended thermal paper roll or which
is the same quality of.
Do not print when it's out of paper, which will seriously damage the
print head and rubber roller.
Make sure printer power is turned off when connecting and
disconnecting the power cable or data cable.
Do not let water or conducting material (eg. Metal) into the printer,
please turn off the power immediately if happened.
Please make sure to charge the battery for 60% or above and then
remove the battery from the printer and store separately if the printer
will not be used for a long period of time.
Please keep this manual for your reference.

Main Features:

Paper roll diameter: 50±0.5mm
Two kinds of Interface optional: USB+Bluetooth (standard ),
USB+WIFI (optional)
Standby time: m ore than 36 hours for Wifi mode, more than
for BT mode.
USB+Bluetooth: BT3.0 and BLE4.0, support Android and iOS system.
USB+WIFI: AP/STA/AP+STA mode to set up the networks.
Support USB virtual COM port for developing and testing by developer.
Compatible with ESC/POS printing commands, support NV logo
download printing, various 1D bar code and QR code.
Low power consumption, good print quality, 50km mechanism lifespan.
Support GB18030 Simplified Chinese, Big5 traditional Chinese,
Korean, international character set and extended code pages.
LED can be showed abnormal condition of the printer, battery capacity
status, charging and connection status ect.
Freely offer DLL, SDK, Demo for developing.
Unpacking
After unpacking the unit, please check that all the necessary
accessories are included in the package.
User's manual
Printer
Lithium battery
USB cable
Power adapter
Technique Spec
Printing Print method
Print width
Paper diameter
Paper thickness
Paper width
Print speed
Paper cutting way
Dot density
Interface
Barcode &
Print commands
Character
Fonts
Character size
Fonts
Barcode
Code page
96 hours
Data
Buffer
NV Flash
Physical Dimension
Properties
Weight
Power adapter
Power
Lithium battery
Charge period
Work
Environment
Environment
Storage
Environment
Reliability Mechanism
1pcs
1pcs
1pcs
1pcs
1pcs
Direct thermal line
80mm
50±0.5mm
0.06~0.08mm
72mm (Max)
60mm/s (max)
Tear-off
576dot/line
USB+Bluetooth3.0/BLE4.0 (Standard)
USB+WIFI (Optional)
Compatible with ESC/POS
ANK Font: Font A: 12*24dots
Font B: 9*17dots
Simplified/Traditional Chinese Character,
Korean: 24*24dots
GB18030, Big5, Korean
UPC-A/UPC-E/EAN(JAN)13/EAN(JAN)8/
CODE39/CODABAR/ITF/CODE93/
CODE128/QR code
PC437/Katakana/PC850/PC860/PC863/
PC865/West Europe/Greek/Hebrew/
East Europe/Iran/WPC1252/PC866/PC852/
PC858/IranII/Latvian/Arabic/PT151,1251/
PC747/WPC1257/Vietnam/PC864/PC1001/
Uygur/Thai
4K bytes
60K bytes
131*107*58mm
430g (including battery)
Input: AC220V output: DC 9V/1A
2200mAh/7.4V
3h-5h
Temperature: 0～45℃, Humidity: 10～90%
Temperature: 0～50℃, Humidity: 10～90%
50km