Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KEF Blade
Summary of Contents for KEF Blade
- Page 1 Blade ow n e r ’s m a nu a l...
- Page 3 Please take a little time to read these instructions prior to use. Your KEF Blade speakers are tall, slim and extremely heavy. Installed correctly on a smooth, level surface, your speakers should be entirely safe to listen to and to live with.
-
Page 4: Table Of Contents
contents Specifications Installation and Operation Page 10 - unpacking, handling Page 14 - amplifier to Page 19 and after care speaker connections Page 11 - adjusting the feet Page 15 - amplifier requirements and/or spikes and power handling Page 12 - speaker placement Page 16 - single, bi-wire and room acoustics and bi-amp connections... -
Page 6: Installation And Operation
Prior to and all the required accessories for with KEF designed substantial your speakers will be rear of the Blade to gauge when speaker is close to vertical, but unpacking, please ensure that the connecting and positioning your... -
Page 7: Speaker Placement And Room Acoustics
Installation and operation speaker placement and room acoustics The listening room is one of the Positioning the speaker in a corner Be aware also that soft furnishings most variable elements in the hi-fi or near to a side wall is not near to a speaker will deaden the chain and its effect cannot be recommended as the significant... -
Page 8: Amplifier To
fingers, the amplifier power outputs to match conditions such as switch-on too much volume, possibly with KEF Blade speakers are fitted with connects to the left speaker ends of each multi-stranded core your Blade speakers. Conditions of... -
Page 9: Single, Bi-Wire And Bi-Amp Connections
Speaker cables. Poor quality cables can seriously compromise the overall sound of your hi-fi system. KEF recommends that high quality speaker cable be used for connecting your Blade speakers. It is good practice to keep the cables as short as possible. -
Page 10: Specifications
Blade Design Three-way bass reflex, Single Apparent Source driver configuration Drive units Uni-Q driver array: MF: 125mm (5in.) Li-Mg-Al /LCP hybrid cone HF: 25mm (1in.) Al dome Bass units: LF: 4 x 225mm (9in.) with force cancelling Frequency response 40Hz - 35kHz +/- 3dB 28Hz - 45kHz. - Page 13 KEF and Uni-Q are registered trademarks. Uni-Q and other KEF technologies are protected by worldwide patents. All text and image copyrights reserved. KEF reserves the right, in line with continuing research and development, to amend Designed and Manufactured or change specifications. E&OE.
Need help?
Do you have a question about the Blade and is the answer not in the manual?
Questions and answers